Interesting. Maybe not the optimum oscillator for a GPSDO.


>Från: Tim Shoppa<>
Skickat: den 14 september 2016 14:39

There are special "wide-pull-range" VCXO's where a 10MHz unit will indeed
have sensitivity of 600Hz/V or more. e.g.

I don't know exactly what Epson does inside that particular unit, but a
trick to get wide pull range with discrete circuits is to put two or more
crystals in parallel.

Tim N3QE

>>On Wed, Sep 14, 2016 at 4:40 AM, Lars Walenius <>

> The VCXO sensitivity given is strange as it indicates a far to wide span
> so I guessed 30ppm and if it is higher it still needs the damping from
> R2-C2.
> For the OCXO I used the figures given. With 2Hz per volt and 8 Volt span
> you have 16Hz of span. 16Hz divided with 10MHz is 1.6ppm (parts per
> million) can also be said as 1.6us/s.
> Lars

time-nuts mailing list --
To unsubscribe, go to
and follow the instructions there.

Reply via email to