Hi There is a *long* list of information on that unit over on EEVBlog. Bottom line is that if you get a good one (you may not) it is a *much* better solution than the other one you are looking at.
Bob > On Oct 23, 2016, at 9:32 AM, Giuseppe Marullo <giuse...@marullo.it> wrote: > > Thanks to all that have answered, as usual very good advices. > > I am puzzled about what to do, still the total cost of it for a OXCO + > GPS(unit with antenna) + control mcu is 67usd, I doubt I could find anything > like this for a cheaper price new. > > Only cheap alternative could be this one(already discussed here one year ago): > > http://www.ebay.com/itm/141734507722?_trksid=p2057872.m2749.l2649 > > Would this allow me to play as the "standard" ThunderBolt using the same > software? Any preferred model among > 63090/73090/65256 "models"? > > Giuseppe Marullo > IW2JWW - JN45RQ > > PS: Still I like the idea of the kit...the trimble would require PSU, > antenna, boxing and no fancy display... > > > On 10/22/2016 4:02 PM, Giuseppe Marullo wrote: >> Hello, >> >> I know, I know it is not supposed to be high end stuff(timenutted), but I >> was looking for a GPS clock and noticed that this could be a cheap GPSDO too: >> >> http://qrp-labs.com/progrock.html >> >> It has a OCXO option, a box, a display(customizable), a GPS and could be >> probably fitted with a Raspberry Zero for a cheap NTP server too. >> >> Any advice? >> Sorry if this has been already discussed here, didn't find any reference in >> the ML. >> >> Could it be compared to a Thunderbolt GPSO in terms of performance, how >> worse it could be? >> >> I just need a clean/self-calibrating 10MHz reference to tune HF radios >> ...seems good enough for the price. >> >> Giuseppe Marullo >> IW2JWW - JN45RQ >> >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.