(resending as I tried posting in html...)

Hello,

I'm a novice at time issues. I've been gathering info and I think I'm ready to start asking questions.

I'm after a time solution for my personal computer. It looks like I need:

* a standalone box to be my own local personal NTP server (so the variable processing load on my main box can no longer affect host polling software timestamps...)
*    run standard NTP Client & Host software on that box
*    discipline it with PPS from GPS, using an active antenna
* use NTP to obtain the NTP time from this local personal NTP server as required * I don't know if I need two additional boxes: one for the NTP host and another for receiving the GPS PPS signal, like a Pi in kernal mode.

GPS issues.

*    I'm in a semi-basement apartment.
*    Building faces due South.
* Building is 1960's brick & concrete, steel trusses & sheets in place from the concrete floor pours. * Windows from 14" to 38" from the ground. My antenna has to be between those.
*    Window frame is plastic retrofit over wood Pearson-sliders.
* There is a bank of buildings due south of me that leaves me with clearance elevations between 6 and 12 degrees. I'm at 45.42 North. * Due South within what open sky I have, are two heights of electrical wires, around 35 feet out from the building at the edge of the parking lot.

I'm expecting multipath from: those buildings, my building and I assume the wires and possibly the cars?

Between the multipath and a less than full view of the sky, I believe I'm needing a GPS module:

*    that is sensitive,
*    good multipath handling,
*    GPS & GLONASS, to get as many sats possible out of the sky-view I have.

Due to my location difficulties, considering newer more sensitive GPS modules seems to make sense, even if they're not timing modules. I was tempted by a Qualtec L86 with -148|-165 dBm or a SkyTraq Venus838LPx-T. Then a ublox Max-M8Q with -165|-167 dBm & its stationary mode. But then I discovered I can get a ublox NEO-M8T with -165|-167 dBm sensitivity, its multipath handling and concurrent reception of GPS/QZSS, GLONASS, BeiDou & Galileo.

A ublox NEO-M8T with an active timing antenna (GPS | GLONASS ?) seems to be my best chance of being successful at my location.

Questions:

* Is there a more suitable GPS module than the ublox NEO-M8T for my location issues?
*    Can anyone recommend an affordable suitable antenna for GPS & GLONASS?
* One box or two, for running a local NTP host and receiving the PPS from a GPS module? * Is there a better solution for a micro board than a Rasp Pi with its USB controlled Ethernet, or the BBB with it's RF issues?
*    What am I not considering that could end up biting me?

Thanks,

Michael

_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to