I did see that one, but I am hoping I can procure something that isn't from an overseas surplus scrapper. If I can't find anything else, then I guess it's my only choice. Unfortunately, the Heol folks don't have anything to offer here either. It's not a WNRO problem, as the week and date are correct. Even if not, that doesn't affect the GPSDO, only the timecode generation.
Thanks for replying and the eBay pointer. On 01/16/2017 02:56 AM, Mike Cook wrote: > If your friends don’t have a CM3 spare, there is one on eBay item > 141712522709. It might be worth pulling the GPS part and testing it stand > alone as there have been numerous week number roll over problems surfacing. > If that is the case for yours then a replacement gets you nowhere. > >> Le 16 janv. 2017 à 07:32, [email protected] a écrit : >> >> I’ve had an intermittent problem with my ET6000/9390-6000 GPSDO where the >> reported error (the FRQ: display on the LCD) initially is OK (low E-12’s) >> and then creeps up to the limit (~500), and the tracking and locked LEDs go >> out. I’ve spent some time troubleshooting this and it seems confirmed that >> the GPS module has finally gone south. I’m asking if anyone has a similar >> module tucked away somewhere. >> >> The module is basically a Trimble SveeSix-CM3 and is based on the 25040 >> board. It’s labeled 26889-81 so is a variant of the standard TSIP part. Can >> anyone help with a replacement? Exact replacement would be ideal of course, >> but even a standard CM3 would be useful - I’ve done other ‘conversions’ >> before. >> >> Thanks >> >> Paul >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > "The power of accurate observation is commonly called cynicism by those who > have not got it. » > George Bernard Shaw > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
