I considered that. Unfortunately the Heol Designs units don’t emulate the SV6-CM3 and the Ace receivers were not a direct replacement. So it seems they have nothing to offer at this time.
> On Jan 18, 2017, at 1:24 AM, Gregory Beat <[email protected]> wrote: > > Heol Designs offers replacement boards for Trimble GPS receivers. > http://www.heoldesign.com/N01x-Trimble-Lassen-SK2-iQ-sQ-LP-ACE-replacements-boards > > Heol Design's GPS receivers are based on the Copernicus II high performance > GPS chip set and mimic the legacy Trimble GPS receivers. These OEM boards > are designed for use in embedded and industrial applications requiring high > accuracy positioning and timing information. They can also be used as a > replacement and upgrade for users of the Trimble Lassen iQ, SQ, LP, SK2 and > ACE (ACEII, ACEIII) receiver boards, which are now EOL (end of life). > > Some time-nuts members are using the Heol Design N024 solution in their Datum > Tymserve 2100, which also corrects 2 additional firmware/hardware bugs. > http://www.heoldesign.com/N024-GPS-receiver-board-for-Tymserve-2100 > > Sent from iPad Air > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
