On 2/20/2017 4:25 PM, David Scott Coburn wrote:
One odd bit is that the resistor in the transistor emitter leg
measures about 350 ohms (this is R3 in my schematic). The schematic
says it should be 10 ohms. This resistor is on solder posts, so it
looks like a 'selected at assembly' item. Corby: it this the 12 ohm
resistor you mentioned?
Scott, there's no way that oscillator can deliver the power needed to
excite the lamp with that high an R3. Something like the specified 10
Ohms is needed.
Dan
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
