Scott, The resistor should be 12 Ohms nominal, I'd try installing a 12 Ohm and see what happens.
The lamp should light within 10 seconds or so of applying power. If you have a spectrum analyzer you can place a loose wire close to the lamp assy and see the approx 120Mhz signal if it's oscillating! The lamp will be a whitish color when cold and a more reddish violet if hot. Cheers, Corby _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
