Does it have a saved/surveyed position? With a saved position you can reasonable time performance with 1 sat. Without a saved position all bets are off, there is no way for the receiver to determine the receiver/satellite clock difference.
Trimble reports that the device is in "over-determined clock" mode if that is how it is configured. Even if it is in "over-determined clock" mode the receiver may not have enough data to do anything effective. Trimble's overdetermined clock mode is basically a "position hold" mode. ---------------- >I just re-checked this with a Resolution-T, and it does go into OD mode with >all but 1 SV masked from cold restart using a real SV. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.