On Mon, 6 Mar 2017 00:38:35 +0000, you wrote:
>Does it have a saved/surveyed position? With a saved position you can >reasonable time performance with 1 sat. Without a saved position all bets >are off, there is no way for the receiver to determine the receiver/satellite >clock difference. > >Trimble reports that the device is in "over-determined clock" mode if that is >how it is configured. Even if it is in "over-determined clock" mode the >receiver may not have enough data to do anything effective. Trimble's >overdetermined clock mode is basically a "position hold" mode. > It will stay in 2d/3d mode if there is no stored position. With a stored position the Resolution-T does seem to be pretty stable with only 1 SV. With the simulator it will switch to OD mode for about 2 seconds, then its status changes to "no SVs usable" and it stops using the simulated SV. I still have many navigation message changes to test out -- something may work. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
