Steve,

I assume that you received my payment? I sent it the day that you advised everyone of the total

Thanks.

Fred

On 5/21/2017 3:42 PM, Steve - Home wrote:
Jerry is making rapid progress with the machine work on the end plates and 
should be contacting those who have paid to provide you with the follow on 
postage cost.

After going through the weekend mail and a PayPal update today, there are still 
10 people who haven't paid. That represents 40 plates we're holding. Please pay 
by Friday May 26 or we'll have to offer them to others. I've also had a couple 
of requests after the initial order had closed. If I have cancellations or 
no-pays I will first fill additional orders from those before looking at a 
second order. I don't think we'll get as good a discount on the second order, 
if there is one, as the quantity will be much smaller.

Here is some additional information from a list member who made the kits 
possible. There are clear lenses available for the LED holes that will dress up 
the front panel but are not necessary for proper operation in a lab or shop 
environment. The lenses are available from Mouser Electronics, part number 
593-3220C, manufacturer's part number CMS322CTP. The retainer for the lens is 
Mouser part number 593-RNG268, manufacturer's part number RNG268. Lenses are 
$1.44 each in small quantities, retainers are $.26 in small quantities. You'll 
want 4 of each. You'll have to slightly enlarge each hole to accommodate the 
lenses. Again, these are not necessary for proper operation.

Steve
WB0DBS



_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to