Hi Chris,
On 06/22/2017 04:37 PM, Chris Caudle wrote:
On Thu, June 22, 2017 7:40 am, Mike Seguin wrote:
For anything critical, I use these connector from the professional sound
industry.
http://www.neutrik.com/en/speakon/
Neutrik make a variant specifically created for power connections instead
of speaker connections. I think they are essentially the same style
design but with different color coding to make them stand out from speaker
connections. I don't know if the contact plating may be different, or the
spacing different so it can handle higher voltages. Ground mates first
before the two power pins (three pin instead of the four pin Speakon). UL
listed for up to 250V AC.
http://www.neutrik.com/en/powercon-20a/
Speakon and Powercon cannot mate. This is intentional, so you don't feed
your speaker 240 VAC which would burn the speaker up in most cases.
Same basic ideas thought, but re-applied.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
