Thanks everyone for the swift and comprehensive response, the specific device was purchased by a friend who is building a copy of my 100MHz OCXO PLL using an HMC1031 and he wanted to check the voltage/frequency and power specs.

I had tried their Twitter and the Contact Us on the Vectron website, but didn't get anything back so far.


I'll pass on the info to my friend.

Neil

On Wed, 9 Aug 2017 08:07:28 -0700, jimlux wrote:
On 8/8/17 11:04 PM, Neil Smith G4DBN wrote:
Does anyone have any technical info on a Vectron Laboratories 100MHz OCXO, model 724Y3067 (part number A61583-1) please? Can’t find a datasheet on the current Vectron Inc website and my Google-fu is weak today.
Neil
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

that doesn't resemble a standard vectron part number

You might look at the CO-724

https://www.vectron.com/products/ocxo/co724725.htm

I don't know if Y indicates the temperature range... probably a custom.

FOr others in that series, the next two digits indicate the frequency
stability - 58 -> 5E-8, 28 -> 2E-8, 17->1E-7

30 -> 3E-10?

If you're looking at the one in the various online ads, the pinout is
pretty different - this is almost certainly a custom.

You could always send an email to Vectron


_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to