The True Position GPSDO is working, locked to 8 satellites. It's 10MHz output is extremely close to the X72's output. Using an oscilloscope to compare the signals with a lissajous pattern, there is only a very small, slow movement, barely perceivable. I don't need to do any calibration to the X72. Steve
On Sunday, October 1, 2017 10:45 AM, Stephan Flor via time-nuts <time-nuts@febo.com> wrote: I figured it out. It was the ASCII settings, it's working now. - ASCII Sending, "Echo typed characters locally" - ASCII Receiving, "Append line feeds to incoming line ends" Thanks,Steve On Sunday, October 1, 2017 8:30 AM, Stephan Flor <spf...@yahoo.com> wrote: I received my True Position GPSDO. I'm testing it.I am connected to it via a rs232 port, and using HyperTerminal on a XP laptop to communicate. I'm getting the boot message "GETVER 12.0.1 BOOT....". This may be a stupid question, but how do I get the boot message to stop so I can send the "$PROCEED" command? If I type while the message is scrolling, I have no courser, and no text appears on the screen. Thanks,Steve On Friday, September 29, 2017 5:32 PM, Attila Kinali <att...@kinali.ch> wrote: On Sun, 24 Sep 2017 01:06:36 -0400 ewkehren via time-nuts <time-nuts@febo.com> wrote: > Starting with a 10 second clean up loop for a FEI 5680/GPSDO to now 600 > Seconds using Wenzel's j circuit for the Tbolt we have a variety of boards. Which one is Wenzel's j circuit? Google does not seem to be able to find it. And going through relevant circuits on wenzel.com didnt reveal any j circuit. -- It is upon moral qualities that a society is ultimately founded. All the prosperity and technological sophistication in the world is of no use without that foundation. -- Miss Matheson, The Diamond Age, Neil Stephenson _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.