Is there an easy way to get 10Mhz out of the REF1?

Next time I am using my electric screwdriver to take this apart.  I can’t 
believe how many bolts it has.  I used a screwdriver that turns double in 
reverse, pretty cool tool, but even then it took forever.


> On Nov 15, 2017, at 7:00 AM, Bob Camp <kb...@n1k.org> wrote:
> 
> Hi
> 
> At some very basic level, the GPSDO needs to decide when to go into or come
> out of holdover. That decision often involves initial setup of the GPS module 
> and
> subsequent monitoring of the module. The risk in swapping modules is always
> tripping over an obscure IF statement somewhere that does not work right with
> the “new” module. On the Lucent boxes, there is a survey process “up front’ 
> that
> likely gets tangled when you change modules …..
> 
> Bob
> 
>> On Nov 15, 2017, at 1:27 AM, Mark Sims <hol...@hotmail.com> wrote:
>> 
>> It might be eye candy, but is very useful eye candy when coupled with the 
>> satellite SNR values.  A GPSDO does not NEED any communications to the GPS 
>> or the outside world,  but EVERY commercial one does support it.  
>> 
>> The GPSDO firmware asks for the sat info from the GPS (so it can show it in 
>> the SYST:STAT status page) and, if it doesn't get it, it assumes the GPS is 
>> defective, crawls into a corner, and sobs.
>> 
>> ----------------
>> 
>>> Isn’t info about what satellites are where, just eye candy and irrelevant 
>>> to a real GPSDO?
>> _______________________________________________
>> time-nuts mailing list -- time-nuts@febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to