Am 19.01.2018 um 20:31 schrieb Tom Van Baak:
John's TADD-2-mini [1] uses the Wenzel sine-to-square converter. It performs very well but requires +10 V. I'm looking for a solution that works at 5 V (e.g., USB powered) and also uses fewer parts. Wenzel also mentions using a differential line receiver [2]. That would be an ideal single-chip 5 V solution for me but the two parts he mentions, MC1489 [3] and SN55182 [4], don't appear fast enough for a 10 MHz input. Can any of you circuit experts suggest some line receivers that would work? Maybe DS9637 [5]? This isn't for cesium work so it doesn't have to be quite as good as the TADD-2.
< http://cds.linear.com/docs/en/datasheet/6957fb.pdf > < http://cds.linear.com/docs/en/design-note/dn514f.pdf > I have used it, found no problems. It is somewhat small :-) regards, Gerhard _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
