Hi If you *do* go swapping around OCXO’s (or whatever) on a GPSDO board, it’s very nice to be able to change the internal “magic numbers” to get the control loop running properly again. The TBolt kind of spoiled us all in that regard. Most GPSDO’s are not very user friendly in this regard ( = you can’t get at the numbers you need to change).
Bob > On Mar 19, 2018, at 1:01 PM, Gregory Beat <[email protected]> wrote: > > John - > > I would NOT bother with trying to replace the 10 MHz oscillator. > > Spend your $$ for the inexpensive Arduino board, LCD, 5 volt antenna, and > nice enclosure .... that will provide you with a “self-running” GPSDO unit > (operator intervention not required to operate). > The fact that Mt. Airy has already provided the Arduino “firmware” (HEX) is a > BIG plus — IF you have no coding experience. > > In addition, you should change to Google for Internet searches, and routinely > post purchase queries to focus groups, like time-nuts, before blindly > purchasing on eBay. > That is the “smart approach”, that saves time, $$ and get what you desire. > > Greg, w9gb > === > Date: Sun, 18 Mar 2018 09:59:08 -0500 > From: John Green <[email protected]> > To: [email protected] > Subject: [time-nuts] Looking for information on True Position GPSDO. > > This isn't a bad looking little board. > I was thinking of pulling the little CTS oscillator and replacing it with > something better. > The fact that you have to tell it to do its thing is something of a bummer, > but I think I can live with it. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
