If all you need is the connector, they are available from Galco. The connector is:
https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3106a18-22s or https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3106A18-22S-F The strain relief is: https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3057-10a or https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3057-10A-F The first item in each category is green, the second is black. Hope this helps. Joe -----Original Message----- From: time-nuts [mailto:[email protected]] On Behalf Of Donald E. Pauly Sent: Sunday, November 18, 2018 8:04 PM To: [email protected]; Donald E. Pauly Subject: [time-nuts] HP Cesium Power Cords For those needing hard to find power cords for HP cesium standards they can be found at https://www.ebay.com/itm/132858288506 . These cables are for 120 V ac 60 Hz power. While some HP5065A rubidium standards use the same power cord, not all do. Beware and see http://leapsecond.com/museum/hp5065a/conn.htm . For some, you will need to change the order of three pins by resoldering. If you have a pin removal tool, you can merely move the pins. Perhaps the seller can accommodate you in this case. I have no information on cables for 240 V ac 60 Hz or 220 V ac 50 Hz at this time. Contact me off list if you need these cables and I will research them. WB0KVV _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
