I have used the Galco connectors and they work well. Grab a new power cord for nothing and cut the EIJ C14 side off and use that. That way the connector and cord are brand new. I find older cords tend to deteriorate after 30 years. Regards Paul WB8TSL
On Mon, Nov 19, 2018 at 10:25 AM J. L. Trantham <[email protected]> wrote: > If all you need is the connector, they are available from Galco. The > connector is: > > https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3106a18-22s > > or > > https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3106A18-22S-F > > > The strain relief is: > > https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3057-10a > > or > > https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3057-10A-F > > > The first item in each category is green, the second is black. > > Hope this helps. > > Joe > > > > -----Original Message----- > From: time-nuts [mailto:[email protected]] On Behalf Of > Donald E. Pauly > Sent: Sunday, November 18, 2018 8:04 PM > To: [email protected]; Donald E. Pauly > Subject: [time-nuts] HP Cesium Power Cords > > For those needing hard to find power cords for HP cesium standards > they can be found at https://www.ebay.com/itm/132858288506 . > These cables are for 120 V ac 60 Hz power. > > While some HP5065A rubidium standards use the same power cord, not all > do. Beware and see http://leapsecond.com/museum/hp5065a/conn.htm . > For some, you will need to change the order of three pins by > resoldering. If you have a pin removal tool, you can merely move the > pins. Perhaps the seller can accommodate you in this case. > > I have no information on cables for 240 V ac 60 Hz or 220 V ac 50 Hz > at this time. Contact me off list if you need these cables and I will > research them. > > WB0KVV > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
