Bill Perry Company should also have them
He should be cheaper with the same quality.
Bill is easy to deal with but has no web presence.
You have to call (502) 893-8724.
I have dealt with him over the phone and at ham fests.
He is very knowledgeable about all types of connectors.
Glenn
WB4UIV
On 11/19/2018 10:31 AM, paul swed wrote:
I have used the Galco connectors and they work well. Grab a new power cord
for nothing and cut the EIJ C14 side off and use that. That way the
connector and cord are brand new.
I find older cords tend to deteriorate after 30 years.
Regards
Paul
WB8TSL
On Mon, Nov 19, 2018 at 10:25 AM J. L. Trantham <[email protected]> wrote:
If all you need is the connector, they are available from Galco. The
connector is:
https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3106a18-22s
or
https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3106A18-22S-F
The strain relief is:
https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3057-10a
or
https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3057-10A-F
The first item in each category is green, the second is black.
Hope this helps.
Joe
-----Original Message-----
From: time-nuts [mailto:[email protected]] On Behalf Of
Donald E. Pauly
Sent: Sunday, November 18, 2018 8:04 PM
To: [email protected]; Donald E. Pauly
Subject: [time-nuts] HP Cesium Power Cords
For those needing hard to find power cords for HP cesium standards
they can be found at https://www.ebay.com/itm/132858288506 .
These cables are for 120 V ac 60 Hz power.
While some HP5065A rubidium standards use the same power cord, not all
do. Beware and see http://leapsecond.com/museum/hp5065a/conn.htm .
For some, you will need to change the order of three pins by
resoldering. If you have a pin removal tool, you can merely move the
pins. Perhaps the seller can accommodate you in this case.
I have no information on cables for 240 V ac 60 Hz or 220 V ac 50 Hz
at this time. Contact me off list if you need these cables and I will
research them.
WB0KVV
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
--
-----------------------------------------------------------------------
Glenn Little ARRL Technical Specialist QCWA LM 28417
Amateur Callsign: WB4UIV [email protected] AMSAT LM 2178
QTH: Goose Creek, SC USA (EM92xx) USSVI LM NRA LM SBE ARRL TAPR
"It is not the class of license that the Amateur holds but the class
of the Amateur that holds the license"
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
