Hello David, Thanks for the reply, it came froma recommended Lithuanian source, where others have no issues with similar devices. I e-mailed them re this but got no rely, sadly. Is there any way to interrogate it (not the suppliers.... ;)) to see if it's legit?
Thursday, January 17, 2019 Best regards, Chris mailto:[email protected] DJTvtn> 17/01/2019 14:42 DJTvtn> I have a Ublox NEO-M8T-0-10 that in the OE state shows no output on DJTvtn> TP2. If I programme it with the UCentre software for say 500hZ output DJTvtn> I sill see nothing on TP2. Do I need to pull it high on boot or DJTvtn> anything to see an output please? I am not probing it with a X10 scope DJTvtn> probe until after it has booted, so I don't believe it's pulled low on DJTvtn> boot, although I can't see how a X10 probe setting could pull it DJTvtn> anyay. TP0 behaves normally and accepts changes in output frequency. DJTvtn> Otherwise it also seems to generally act correctly. Thanks DJTvtn> Best Regards, DJTvtn> Chris Wilson. DJTvtn> ===================================== DJTvtn> Are you sure it's genuine ublox? There are many counterfeits about. DJTvtn> Cheers, DJTvtn> David _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
