David,
Don't tap the time LEDs.
For InCase series NEO-M8T TIME & RAW receiver board
(https://www.csgshop.com/product.php?id_product=218), access to PPS is
through the 12 pin JST SH socket, its harness or the breakout board it
feeds.
You can see the breakout board's labelled items at
https://www.csgshop.com/product.php?id_product=217
In addition to accessing the coms for SPI, UART, USB & I2C, these
include: TIMEPULSE (TIME1), TIMEPULSE2 (TIME2), EXTINT0 & EXTINT1.
You can use your own JST connector, or get their harness and cut one end
off if you want access to those leads directly. I provide power through
the breakout board's USB, and I soldered 4 pin headers onto the breakout
board so I can build custom cables for for quick re-config for testing.
[]
Regards,
Michael
======================================
Michael,
Thanks! Good to know there are other variants than the one quoted.
Cheers,
David
--
SatSignal Software - Quality software for you
Web: http://www.satsignal.eu
Email: [email protected]
Twitter: @gm8arv
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
