Laurence i am not sure what you mean by cut-down this is the default installed ntp.conf file with the only modification of server list and set var details.
Thanks Parag Laurence Skinner said the following on 9/2/2006 12:59 PM: > From: "Parag Mehta" <[EMAIL PROTECTED]> >> >> thanks for the info but here is the output: >> ntpq -c peers >> remote refid st t when poll reach delay offset >> jitter >> ============================================================================== >> >> *LOCAL(0) LOCAL(0) 3 l 41 64 377 0.000 0.000 >> 0.004 > > Local as stratum 3 sounds a bit odd (mine's 13)... > >> It appears that no peers get listed here. here is some more config info >> from my server: >> >> /etc/ntp.conf >> restrict default kod nomodify notrap >> restrict xx.xxx.xx.xx >> restrict default kod nomodify notrap >> server time-a.timefreq.bldrdoc.gov > > [snip] > >> broadcastdelay 0.008 >> authenticate yes >> keys /etc/ntp/keys > > Not familiar with authentication - would imagine you don't need it on > public servers. > >> /etc/ntp/step-tickers > > Not familiar with that file either... > > Maybe try with a cut down to the minimum ntp.conf file and see if that > works. > > Laurence > _______________________________________________ > timekeepers mailing list > [email protected] > https://fortytwo.ch/mailman/cgi-bin/listinfo/timekeepers _______________________________________________ timekeepers mailing list [email protected] https://fortytwo.ch/mailman/cgi-bin/listinfo/timekeepers
