Sorry excel change me the base in the values and they were wrong. Take this file instead.
Regards,
----
Rodo
-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Rodolfo de Paz Alberola
Sent: Thu 28/02/2008 1:23 PM
To: tinyos-help
Subject: Re: [Tinyos-help] Output Power levels CC2420
Folks,
I calculated all values using cubic spline interpolation and obtained
the vectors of the txt file attached
Maybe It will be useful for your experiments with cc2420 radiochip ;-)
-----
Rodo
2008/2/27, [EMAIL PROTECTED] <[EMAIL PROTECTED]>:
This would certainly be helpful for my current work as well.
Now, I have a related question, Does anyone know what the
default power
level on the CC2420 is?
i.e. If I just turn on the mote and start sending data, what is
the RF
power set to?
Thanks,
Paul Bender
Rodolfo de Paz Alberola wrote:
>I am extending a micaz software emulator to support CC2420 and testing
>it with tinyos-2.x.
>
>When dealing with the Output Power Levels that cc2420 support in the
>TXCTRL.PA_LEVEL register, I found the problem that in data sheet they
>don't indicate all dBm values for the different 32 values, the only
>indicate the following:
>
>PA_LEVEL Pow (dBm)
>31 0
>27 -1
>23 -3
>19 -5
>15 -7
>11 -10
>7 -15
>3 -25
>
>However using the cc2420 driver of tinyos-2.x I can set 32 different
>values, so I would like to know what happend if somebody set a for
>example PA_LEVEL = 21, which Pow(dBm) value should give the cc2420
>radiochip? anybody has the completely correspondence between levels and
>dBm? or even much better a equation to calculate them?
I once set PA_LEVEL = 5 accidentally in a radio measurement. Reception
quality was between setting 7 and 3, so it was apparently sending at
-20 dBm or so.
If you plot the above values, you get what looks like a square root
curve. Maybe it's OK to interpolate the other settings from a fitted
equation like P = a*sqrt(b*PA_LEVEL)+c.
Regards,
Alexander
Power_cc2420
Description: Power_cc2420
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
