---------- Forwarded message ---------- From: unauna abiabi <[EMAIL PROTECTED]> Date: Sun, Mar 9, 2008 at 5:54 PM Subject: Re: [Tinyos-help] problem with Deluge T2 To: "Razvan Musaloiu-E." <[EMAIL PROTECTED]>
> > The repository is also accessible using http. Try this: > git clone http://hinrg.cs.jhu.edu/git/deluge/tinyos-2.x.git > Sorry, have I to execute git in tinyos-2.x directory and it will update all the necessary file or have I to download all and then replace the file in tinyos-2.x with those downloaded with git?? thx for your help bye > > -- > Razvan ME > > > On Thu, Mar 6, 2008 at 7:05 PM, Razvan Musaloiu-E. <[EMAIL PROTECTED]> > > wrote: > > > >> Hi! > >> > >> On Thu, 6 Mar 2008, unauna abiabi wrote: > >> > >> > On Thu, Mar 6, 2008 at 12:35 PM, unauna abiabi <[EMAIL PROTECTED]> > >> wrote: > >> > > >> >> Hi, > >> >> > >> >> I resolved the problem of sha1sum doing a link to the md5 > >> >> and retried to do execute the burn script > >> >> > >> >> and the result is this:: > >> >> > >> >> > >> >> eni-enis-computer:/opt/tinyos-2.x/apps/tests/deluge/Blink enieni$ > ./burn > >> >> /dev/tty.usbserial-XBQABZ6I telosb > >> >> rm -rf build > >> >> rm -rf _TOSSIMmodule.so TOSSIM.pyc TOSSIM.py > >> >> ============================ Compile and load Blink > >> >> ============================ > >> >> mkdir -p build/telosb > >> >> tos-storage-stm25p /opt/tinyos-2.x/tos/platforms/telosb < > >> >> volumes-stm25p.xml >build/telosb/StorageVolumes.h || rm -f > >> >> build/telosb/StorageVolumes.h > >> >> compiling BlinkAppC to a telosb binary > >> >> ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow > >> >> -Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board= > >> >> -DDEFINED_TOS_AM_GROUP=0x22 -Ibuild/telosb -DDELUGE_BASESTATION > >> >> -DDELUGE_BASESTATION -DDELUGE -I/opt/tinyos-2.x/tos/lib/net > >> -I/opt/tinyos- > >> >> 2.x/tos/lib/net/drip -I/opt/tinyos-2.x/tos/lib/net/Deluge > >> -I/opt/tinyos- > >> >> 2.x/tos/lib/net/Deluge/FlashVolumeManager -I/opt/tinyos-2.x > >> /tos/lib/net/Deluge/BlockStorageManager > >> >> -I/opt/tinyos-2.x/tos/lib/net/Deluge/extra -I/opt/tinyos-2.x > >> /tos/lib/net/Deluge/extra/msp430 > >> >> -I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/telos -I/opt/tinyos-2.x > >> /tos/lib/net/Deluge/extra/telosb > >> >> -Wl,--section-start=.text=0x4a00,--defsym=_reset_vector__=0x4000 > >> >> -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"enieni\" > >> >> -DIDENT_HOSTNAME=\"eni-enis-comput\" -DIDENT_USERHASH=0x04fea1acL > >> >> -DIDENT_TIMESTAMP=0x47cfd48eL -DIDENT_UIDHASH=0x5b86b682L > >> BlinkAppC.nc-lm > >> >> compiled BlinkAppC to build/telosb/main.exe > >> >> 32728 bytes in ROM > >> >> 1249 bytes in RAM > >> >> msp430-objcopy --output-target=ihex build/telosb/main.exe > >> >> build/telosb/main.ihex > >> >> writing TOS image > >> >> cp build/telosb/main.ihex build/telosb/main.ihex.out > >> >> installing telosb bootloader using bsl > >> >> tos-bsl --telosb -c /dev/tty.usbserial-XBQABZ6I -r -e -I -p > >> /opt/tinyos- > >> >> 2.x/tos/lib/tosboot/build/telosb/main.ihex > >> >> MSP430 Bootstrap Loader Version: 1.39-telos-8 > >> >> Mass Erase... > >> >> Transmit default password ... > >> >> Invoking BSL... > >> >> Transmit default password ... > >> >> Current bootstrap loader version: 1.61 (Device ID: f16c) > >> >> Changing baudrate to 38400 ... > >> >> Program ... > >> >> 2112 bytes programmed. > >> >> Reset device ... > >> >> installing telosb binary using bsl (without mass erase) > >> >> tos-bsl --telosb -c /dev/tty.usbserial-XBQABZ6I -r -I -p > >> >> build/telosb/main.ihex.out > >> >> MSP430 Bootstrap Loader Version: 1.39-telos-8 > >> >> Invoking BSL... > >> >> Transmit default password ... > >> >> Current bootstrap loader version: 1.61 (Device ID: f16c) > >> >> Changing baudrate to 38400 ... > >> >> Program ... > >> >> 32760 bytes programmed. > >> >> Reset device ... > >> >> rm -f build/telosb/main.exe.out build/telosb/main.ihex.out > >> >> +-------------------------------------------------------+ > >> >> | | > >> >> | At this point the first led (red) should be blinking. | > >> >> | | > >> >> | Press ENTER to continue... | > >> >> | | > >> >> +-------------------------------------------------------+ > >> >> > >> >> ============================= Compile a new Blink > >> >> ============================== > >> >> mkdir -p build/telosb > >> >> compiling BlinkAppC to a telosb binary > >> >> ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow > >> >> -Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board= > >> >> -DDEFINED_TOS_AM_GROUP=0x22 -Ibuild/telosb -DBLINK_REVERSE > >> >> -DDELUGE_BASESTATION -DDELUGE_BASESTATION -DDELUGE -I/opt/tinyos-2.x > >> /tos/lib/net > >> >> -I/opt/tinyos-2.x/tos/lib/net/drip -I/opt/tinyos-2.x > /tos/lib/net/Deluge > >> >> -I/opt/tinyos-2.x/tos/lib/net/Deluge/FlashVolumeManager > -I/opt/tinyos- > >> 2.x/tos/lib/net/Deluge/BlockStorageManager > >> >> -I/opt/tinyos-2.x/tos/lib/net/Deluge/extra -I/opt/tinyos-2.x > >> /tos/lib/net/Deluge/extra/msp430 > >> >> -I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/telos -I/opt/tinyos-2.x > >> /tos/lib/net/Deluge/extra/telosb > >> >> -Wl,--section-start=.text=0x4a00,--defsym=_reset_vector__=0x4000 > >> >> -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"enieni\" > >> >> -DIDENT_HOSTNAME=\"eni-enis-comput\" -DIDENT_USERHASH=0x04fea1acL > >> >> -DIDENT_TIMESTAMP=0x47cfd4d0L -DIDENT_UIDHASH=0x36649339L > >> BlinkAppC.nc-lm > >> >> compiled BlinkAppC to build/telosb/main.exe > >> >> 32728 bytes in ROM > >> >> 1249 bytes in RAM > >> >> msp430-objcopy --output-target=ihex build/telosb/main.exe > >> >> build/telosb/main.ihex > >> >> writing TOS image > >> >> =============================== Upload the image > >> >> =============================== > >> >> Pinging node ... > >> >> Connected to Deluge nodes. > >> >> No valid image was detected. > >> >> -------------------------------------------------- > >> >> Create image: /opt/local/bin/tos-build-deluge-image -i 1 > >> >> build/telosb/tos_image.xml > >> >> > >> >> -->>> > >> >> it just stop here and don't continue... is strange, isn't it? > >> > > >> > > >> > AND > >> > when I do a Ctrl+C it gives me this error > >> > > >> > Create image: /opt/local/bin/tos-build-deluge-image -i 1 > >> > build/telosb/tos_image.xml > >> > ^CTraceback (most recent call last): > >> > File "/opt/local/bin/tos-deluge", line 417, in <module> > >> > inject(imgNum, sys.argv[5]) > >> > File "/opt/local/bin/tos-deluge", line 303, in inject > >> > print p.stderr.read(), > >> > KeyboardInterrupt > >> > >> Can you try to run the tos-build-image-image command by hand? You need > >> give the following command: > >> /opt/local/bin/tos-build-deluge-image -i 1 > >> build/telosb/tos_image.xml > >> > >> -- > >> Razvan ME > >> > >> >> > >> >> I didn't get the file from > >> >> http://hinrg.cs.jhu.edu/git/?p=deluge/tinyos-2.x.git > >> >> bc I don't know which one to get and it seems that I can't download > the > >> >> file > >> >> bc there is just a copy-paste from an editor... > >> >> There is just a file in download version, the last one: NetProgM.c > >> >> I replace the old file in my filesystem with this one but when I run > >> the > >> >> burn script some errors get out... > >> >> > >> >> In file included from /opt/tinyos-2.x > >> >> /tos/lib/net/Deluge/extra/NetProgC.nc:43, > >> >> from /opt/tinyos-2.x > /tos/lib/net/Deluge/DelugeC.nc:59, > >> >> from BlinkAppC.nc:47: > >> >> In component `NetProgM': > >> >> /opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc:45: interface > >> >> ReprogramGuard not found > >> >> /opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc: In function > >> >> `NetProg.programImageAndReboot': > >> >> /opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc:89: interface > has > >> no > >> >> command or event named `okToProgram' > >> >> /opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc: At top level: > >> >> /opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc:93: > >> `okToProgramDone' > >> >> is not in interface `ReprogramGuard' > >> >> make: *** [exe0] Error 1 > >> >> > >> >> > >> >> --->> I think that to use this file I have to download other file > but > >> it > >> >> seems that I can't download the > >> >> file from that page.... > >> >> > >> >> > >> >> > >> >> thx again for your help > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> On Wed, Mar 5, 2008 at 10:53 PM, Razvan Musaloiu-E. < > [EMAIL PROTECTED] > >> > > >> >> wrote: > >> >> > >> >>> Hi! > >> >>> > >> >>> On Wed, 5 Mar 2008, unauna abiabi wrote: > >> >>> > >> >>>> Hi to all, > >> >>>> > >> >>>> I start to "play" with deluge T2 and I'm following > >> >>>> the manual (deluge-t2-manual.html) but I gut problem in the "Quick > >> >>> start" > >> >>>> section. > >> >>>> I'm using tinyos2.x on a macbook duo 2 core with Tiger version > >> 10.4.11 > >> >>>> > >> >>>> > >> >>>> -->>The problem is : > >> >>>> > >> >>>> tinyos::>> ./burn /dev/tty.usbserial-XBQ6TGNF telosb > >> >>>> sh: line 1: sha1sum: command not found > >> >>>> sh: line 1: sha1sum: command not found > >> >>>> rm -rf build > >> >>>> rm -rf _TOSSIMmodule.so TOSSIM.pyc TOSSIM.py > >> >>>> > >> >>>> > >> >>>> ============================ Compile and load Blink > >> >>> ============================ > >> >>>> sh: line 1: sha1sum: command not found > >> >>>> sh: line 1: sha1sum: command not found > >> >>>> mkdir -p build/telosb > >> >>>> tos-storage-stm25p /opt/tinyos-2.x/tos/platforms/telosb < > >> >>> volumes-stm25p.xml >build/telosb/StorageVolumes.h || rm -f > >> >>> build/telosb/StorageVolumes.h > >> >>>> > >> >>>> ... > >> >>>> > >> >>>> =============================== Upload the image > >> >>> =============================== > >> >>>> Pinging node ... > >> >>>> Connected to Deluge nodes. > >> >>>> No valid image was detected. > >> >>>> -------------------------------------------------- > >> >>>> > >> >>>> Create image: /opt/local/bin/tos-build-deluge-image -i 1 > >> >>> build/telosb/tos_image.xml > >> >>>> > >> >>>> Traceback (most recent call last): > >> >>>> File "/opt/local/bin/tos-build-deluge-image", line 117, in > <module> > >> >>>> ident[p] = int(ident[p][:-1], 16) > >> >>>> KeyError: 'userhash' > >> >>>> -------------------------------------------------- > >> >>> > >> >>> sha1sum program is missing and so some important hashes are not > >> computed > >> >>> which makes the tos-build-deluge-image script unhappy. If you > replace > >> >>> sha1sum with md5sum it should work fine. > >> >>> > >> >>> Something else: the Deluge T2 from the CVS doesn't yet contains a > >> bunch > >> >>> of > >> >>> changes and fixes I made. They are available in the following git > >> >>> repository: > >> >>> http://hinrg.cs.jhu.edu/git/?p=deluge/tinyos-2.x.git > >> >>> > >> >>> Have a nice day! > >> >>> Razvan ME > >> >>> > >> >> > >> >> > >> > > >> >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
