Hi!
On Sun, 9 Mar 2008, unauna abiabi wrote:
---------- Forwarded message ----------
From: unauna abiabi <[EMAIL PROTECTED]>
Date: Sun, Mar 9, 2008 at 5:54 PM
Subject: Re: [Tinyos-help] problem with Deluge T2
To: "Razvan Musaloiu-E." <[EMAIL PROTECTED]>
The repository is also accessible using http. Try this:
git clone http://hinrg.cs.jhu.edu/git/deluge/tinyos-2.x.git
Sorry, have I to execute git in tinyos-2.x directory and it will update
all the necessary file or have I to download all and then replace the
file in tinyos-2.x with those downloaded with git??
The command is similar with "cvs co" so executing it in ~/local/src it
will create ~/local/src/tinyos-2.x.
--
Razvan ME
On Thu, Mar 6, 2008 at 7:05 PM, Razvan Musaloiu-E. <[EMAIL PROTECTED]>
wrote:
Hi!
On Thu, 6 Mar 2008, unauna abiabi wrote:
On Thu, Mar 6, 2008 at 12:35 PM, unauna abiabi <[EMAIL PROTECTED]>
wrote:
Hi,
I resolved the problem of sha1sum doing a link to the md5
and retried to do execute the burn script
and the result is this::
eni-enis-computer:/opt/tinyos-2.x/apps/tests/deluge/Blink enieni$ ./burn
/dev/tty.usbserial-XBQABZ6I telosb
rm -rf build
rm -rf _TOSSIMmodule.so TOSSIM.pyc TOSSIM.py
============================ Compile and load Blink
============================
mkdir -p build/telosb
tos-storage-stm25p /opt/tinyos-2.x/tos/platforms/telosb <
volumes-stm25p.xml >build/telosb/StorageVolumes.h || rm -f
build/telosb/StorageVolumes.h
compiling BlinkAppC to a telosb binary
ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow
-Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board=
-DDEFINED_TOS_AM_GROUP=0x22 -Ibuild/telosb -DDELUGE_BASESTATION
-DDELUGE_BASESTATION -DDELUGE -I/opt/tinyos-2.x/tos/lib/net
-I/opt/tinyos-
2.x/tos/lib/net/drip -I/opt/tinyos-2.x/tos/lib/net/Deluge
-I/opt/tinyos-
2.x/tos/lib/net/Deluge/FlashVolumeManager -I/opt/tinyos-2.x
/tos/lib/net/Deluge/BlockStorageManager
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra -I/opt/tinyos-2.x
/tos/lib/net/Deluge/extra/msp430
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/telos -I/opt/tinyos-2.x
/tos/lib/net/Deluge/extra/telosb
-Wl,--section-start=.text=0x4a00,--defsym=_reset_vector__=0x4000
-DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"enieni\"
-DIDENT_HOSTNAME=\"eni-enis-comput\" -DIDENT_USERHASH=0x04fea1acL
-DIDENT_TIMESTAMP=0x47cfd48eL -DIDENT_UIDHASH=0x5b86b682L
BlinkAppC.nc-lm
compiled BlinkAppC to build/telosb/main.exe
32728 bytes in ROM
1249 bytes in RAM
msp430-objcopy --output-target=ihex build/telosb/main.exe
build/telosb/main.ihex
writing TOS image
cp build/telosb/main.ihex build/telosb/main.ihex.out
installing telosb bootloader using bsl
tos-bsl --telosb -c /dev/tty.usbserial-XBQABZ6I -r -e -I -p
/opt/tinyos-
2.x/tos/lib/tosboot/build/telosb/main.ihex
MSP430 Bootstrap Loader Version: 1.39-telos-8
Mass Erase...
Transmit default password ...
Invoking BSL...
Transmit default password ...
Current bootstrap loader version: 1.61 (Device ID: f16c)
Changing baudrate to 38400 ...
Program ...
2112 bytes programmed.
Reset device ...
installing telosb binary using bsl (without mass erase)
tos-bsl --telosb -c /dev/tty.usbserial-XBQABZ6I -r -I -p
build/telosb/main.ihex.out
MSP430 Bootstrap Loader Version: 1.39-telos-8
Invoking BSL...
Transmit default password ...
Current bootstrap loader version: 1.61 (Device ID: f16c)
Changing baudrate to 38400 ...
Program ...
32760 bytes programmed.
Reset device ...
rm -f build/telosb/main.exe.out build/telosb/main.ihex.out
+-------------------------------------------------------+
| |
| At this point the first led (red) should be blinking. |
| |
| Press ENTER to continue... |
| |
+-------------------------------------------------------+
============================= Compile a new Blink
==============================
mkdir -p build/telosb
compiling BlinkAppC to a telosb binary
ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow
-Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board=
-DDEFINED_TOS_AM_GROUP=0x22 -Ibuild/telosb -DBLINK_REVERSE
-DDELUGE_BASESTATION -DDELUGE_BASESTATION -DDELUGE -I/opt/tinyos-2.x
/tos/lib/net
-I/opt/tinyos-2.x/tos/lib/net/drip -I/opt/tinyos-2.x
/tos/lib/net/Deluge
-I/opt/tinyos-2.x/tos/lib/net/Deluge/FlashVolumeManager
-I/opt/tinyos-
2.x/tos/lib/net/Deluge/BlockStorageManager
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra -I/opt/tinyos-2.x
/tos/lib/net/Deluge/extra/msp430
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/telos -I/opt/tinyos-2.x
/tos/lib/net/Deluge/extra/telosb
-Wl,--section-start=.text=0x4a00,--defsym=_reset_vector__=0x4000
-DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"enieni\"
-DIDENT_HOSTNAME=\"eni-enis-comput\" -DIDENT_USERHASH=0x04fea1acL
-DIDENT_TIMESTAMP=0x47cfd4d0L -DIDENT_UIDHASH=0x36649339L
BlinkAppC.nc-lm
compiled BlinkAppC to build/telosb/main.exe
32728 bytes in ROM
1249 bytes in RAM
msp430-objcopy --output-target=ihex build/telosb/main.exe
build/telosb/main.ihex
writing TOS image
=============================== Upload the image
===============================
Pinging node ...
Connected to Deluge nodes.
No valid image was detected.
--------------------------------------------------
Create image: /opt/local/bin/tos-build-deluge-image -i 1
build/telosb/tos_image.xml
-->>>
it just stop here and don't continue... is strange, isn't it?
AND
when I do a Ctrl+C it gives me this error
Create image: /opt/local/bin/tos-build-deluge-image -i 1
build/telosb/tos_image.xml
^CTraceback (most recent call last):
File "/opt/local/bin/tos-deluge", line 417, in <module>
inject(imgNum, sys.argv[5])
File "/opt/local/bin/tos-deluge", line 303, in inject
print p.stderr.read(),
KeyboardInterrupt
Can you try to run the tos-build-image-image command by hand? You need
give the following command:
/opt/local/bin/tos-build-deluge-image -i 1
build/telosb/tos_image.xml
--
Razvan ME
I didn't get the file from
http://hinrg.cs.jhu.edu/git/?p=deluge/tinyos-2.x.git
bc I don't know which one to get and it seems that I can't download
the
file
bc there is just a copy-paste from an editor...
There is just a file in download version, the last one: NetProgM.c
I replace the old file in my filesystem with this one but when I run
the
burn script some errors get out...
In file included from /opt/tinyos-2.x
/tos/lib/net/Deluge/extra/NetProgC.nc:43,
from /opt/tinyos-2.x
/tos/lib/net/Deluge/DelugeC.nc:59,
from BlinkAppC.nc:47:
In component `NetProgM':
/opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc:45: interface
ReprogramGuard not found
/opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc: In function
`NetProg.programImageAndReboot':
/opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc:89: interface
has
no
command or event named `okToProgram'
/opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc: At top level:
/opt/tinyos-2.x/tos/lib/net/Deluge/extra/NetProgM.nc:93:
`okToProgramDone'
is not in interface `ReprogramGuard'
make: *** [exe0] Error 1
--->> I think that to use this file I have to download other file
but
it
seems that I can't download the
file from that page....
thx again for your help
On Wed, Mar 5, 2008 at 10:53 PM, Razvan Musaloiu-E. <
[EMAIL PROTECTED]
wrote:
Hi!
On Wed, 5 Mar 2008, unauna abiabi wrote:
Hi to all,
I start to "play" with deluge T2 and I'm following
the manual (deluge-t2-manual.html) but I gut problem in the "Quick
start"
section.
I'm using tinyos2.x on a macbook duo 2 core with Tiger version
10.4.11
-->>The problem is :
tinyos::>> ./burn /dev/tty.usbserial-XBQ6TGNF telosb
sh: line 1: sha1sum: command not found
sh: line 1: sha1sum: command not found
rm -rf build
rm -rf _TOSSIMmodule.so TOSSIM.pyc TOSSIM.py
============================ Compile and load Blink
============================
sh: line 1: sha1sum: command not found
sh: line 1: sha1sum: command not found
mkdir -p build/telosb
tos-storage-stm25p /opt/tinyos-2.x/tos/platforms/telosb <
volumes-stm25p.xml >build/telosb/StorageVolumes.h || rm -f
build/telosb/StorageVolumes.h
...
=============================== Upload the image
===============================
Pinging node ...
Connected to Deluge nodes.
No valid image was detected.
--------------------------------------------------
Create image: /opt/local/bin/tos-build-deluge-image -i 1
build/telosb/tos_image.xml
Traceback (most recent call last):
File "/opt/local/bin/tos-build-deluge-image", line 117, in
<module>
ident[p] = int(ident[p][:-1], 16)
KeyError: 'userhash'
--------------------------------------------------
sha1sum program is missing and so some important hashes are not
computed
which makes the tos-build-deluge-image script unhappy. If you
replace
sha1sum with md5sum it should work fine.
Something else: the Deluge T2 from the CVS doesn't yet contains a
bunch
of
changes and fixes I made. They are available in the following git
repository:
http://hinrg.cs.jhu.edu/git/?p=deluge/tinyos-2.x.git
Have a nice day!
Razvan ME
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
