Have you programmed other motes with the XMTS400 app? I think they don't
come preprogrammed from factory.
Regards,
Harri
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dhivya
G
Sent: Wednesday, April 09, 2008 11:50 AM
To: Marco Antonio Lopez Trinidad
Cc: TinyOS_Help
Subject: Re: [Tinyos-help] How to display sensor data using moteview
Hi,
I programmed the mote(supposed to be the base station that is
connected to mib520) with XMeshBase_2420_hp under C:\Program
Files\Crossbow\MoteView\xmesh\micaz\XMeshBase. But still I am not able
to display sensor data in pc.
Regards,
Dhivya.
On Wed, Apr 9, 2008 at 1:48 PM, Marco Antonio Lopez Trinidad
<[EMAIL PROTECTED]> wrote:
What is the program you use?
1. TinyOS SerialForwarder uses the next port you use to connect
the programmer.
2. MoteWorks applications suite recognises automatically the
right ports to
program (com_i) and inject or read packets (com_i+1).
I hope it helps,
--marco.
> Hi Anil,
> I am getting 2 ports(com5 and com6) while connecting
MIB520 to pc.
> In step 2, I am programming my mote that is connected to
Mib520. So while
> Programming I have to give lower port(com5). In step 5, I am
getting data
> from sensors and have to display it in PC.So for communication
part I have
> to use higher port(com6). This is wht I did earlier.
> I also tried your idea.But I am getting following error.
> "Can not connect to Mote correctly. Please check your Mote."
>
> Regards,
> Dhivya
>
>
> On Wed, Apr 9, 2008 at 12:47 PM, Anil Karamchandani
<[EMAIL PROTECTED]>
> wrote:
>
> > Hi Dhivya,
> >
> > the port number should be the port through which your
gateway device is
> > connected to the PC. Usually the port number in step 2 and
step 5 is the
> > same. check for the port which is communicating with the
sensor and the PC
> > and give that port number ..
> >
> > hope this helps
> >
> > anil
> >
> > On Wed, Apr 9, 2008 at 12:34 PM, Dhivya G
<[EMAIL PROTECTED]> wrote:
> >
> > >
> > > Hai,
> > > I am using crossbow Professional kit consisting of
Micaz motes,MIB520
> > > programming board and MTS400 sensor board. I want to know
whether I have
> to
> > > program Micaz mote(connected to mib520) to collect data
from sensor using
> > > Moteview.If so how I have to program Micaz mote.
> > > I Connected one micaz mote to mib520 programming
board and
> > > programmed it using moteconfig as follows:
> > > 1) In Moteview I clicked Tools->Program Motes
> > > 2)In MoteConfig window I clicked Settings->Interface
Board. In Interface
> > > board settings window I selected MIB520 and changed com
port to 5 (lower
> > > port)and clicked Apply.
> > > 3)Then I clicked select button under "select file to be
uploaded". I
> > > selected XMeshBase_2420_hp under C:\Program
> > > Files\Crossbow\MoteView\xmesh\micaz\XMeshBase
> > > 4)Then I clicked Program button.
> > > 5)After finishing program I clicked File->Connect to WSN.
In that new
> > > window I selected MIB520 board and com6(higher port) and
XMTS400 board.
> > > 6)After completing all these steps sensor data is not
displaying in PC.
> > >
> > > If my steps are wrong means please correct me.
> > > --
> > > G.Dhivya
> > > _______________________________________________
> > > Tinyos-help mailing list
> > > [email protected]
> > >
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> > >
> >
> >
> >
> > --
> > Regards
> >
> > Anil Karamchandani
>
>
>
>
> --
> G.Dhivya
>
--
G.Dhivya
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
