Hi Gwenhaël! gwenhael.goavec wrote: > Hello, > I'm beginner on TinyOS 2.x. > My Platform is a custom card with msp430. > I need to read informations from the GPS and send this informations to > computer using serial/usb port. The speed connection between card and > computer is 9600 bauds and the speed between gps and msp430 is 4800 > bauds. Computer and gps are connected on the same msp430's port. > UTDXD1 is used for computer's connection and URXD1 for gps. > Actually I have good connection between msp430 and computer. > > How to configuring the Serial connection for having a specific speed for RX > and an other for TX? >
For now I haven't heard it would be possible. To be sure you could check the datasheet of msp430. The first idea I got, you could multiplex these connections and every time switch between both speeds (for both RX/TX). I didn't ever worked with msp430, so maybe someone other could help better. Best wishes, Andrey _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
