Thank you for informations. But I don't see how to switch Gwenhaël
On Mon, 20 Oct 2008 00:23:33 +1100 "Sarfraz Nawaz" <[EMAIL PROTECTED]> wrote: > If you want to read data from GPS at 4800 bits per second and send it > to the computer at 9600 bits per second, you can switch the baudrate > between the two operations. Look at resource arbitration code under > tinyos-2.x/tos/chips/msp430/usart. Unfortunately there is no example > application or code that performs this sort of switching but it > definitely is possible. > > On Sun, Oct 19, 2008 at 10:39 PM, gwenhael.goavec <[EMAIL PROTECTED]> wrote: > > > > Hello, > > I'm beginner on TinyOS 2.x. > > My Platform is a custom card with msp430. > > I need to read informations from the GPS and send this informations to > > computer using serial/usb port. The speed connection between card and > > computer is 9600 bauds and the speed between gps and msp430 is 4800 > > bauds. Computer and gps are connected on the same msp430's port. > > UTDXD1 is used for computer's connection and URXD1 for gps. > > Actually I have good connection between msp430 and computer. > > > > How to configuring the Serial connection for having a specific speed for RX > > and an other for TX? > > > > Thank you very much > > Gwenhaël > > > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > -- Arsenic et vieilles ferrailles http://www.trabucayre.com _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
