Mohamed: RF230PacketC.PacketTransmitPower is what you're looking for.
Janos 2009/3/27 Mohamed H. Seddik <[email protected]>: > Hi all > > Do you know can I found & use this interface (setpower() ) with IRIS mote ? > > > Thanks > > Mohamed > > --- On Mon, 3/23/09, Robert Szewczyk <[email protected]> wrote: > > From: Robert Szewczyk <[email protected]> > Subject: Re: [Tinyos-help] RF output power levels > To: [email protected] > Cc: [email protected] > Date: Monday, March 23, 2009, 5:57 PM > > CC2420 accepts all values between 1 and 31. > > based on some quick modeling I've done a few years ago it looked like > the TX power corresponded to the amplitude of the signal. > > Chipcon claimed that at settings below 3, the signal quality may > suffer. I have used settings 1 and 2; the lowest achievable output > power was somewhere around -40dBm > > rob > > On Mon, Mar 23, 2009 at 8:12 AM, hodiapa <[email protected]> wrote: >> >> So could anybody give a final verdict on this issue? >> How many programmable power levels are there in CC2420's in micaz? >> >> >> >> >> >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
