Hi, as pointed out by Razvan, what is the output from the dmesg command when you unplug and plug MIB520? Even without any mote, like MICAz, it should detect automatically the FT2232 chip at the MIB520 informing ttyUSBxx and ttyUSByy (ex.: ttyUSB0 and ttyUSB1). I did not installed anything in XUbuntu to detect the serial ports from MIB520.
Motelist works with telosB/tmoteSky, at least in my Xubuntu environment. Can anyone say if it also works with different motes? Regards, Agnelo Rocha da Silva 2009/8/28 praveen khethavath <[email protected]> > Hi, > > I am using Xubuntos, and it doesnt say any thing when i connect the board. > when i check motes using $motelist, it says no devices found. I checked > google and found i should install FT2232C driver(VCP). but i am not able it > install it as weel. > Please can you suggest how to program micaz in xubuntos. > > regards, > Praveen > > Razvan Musaloiu-E.-2 wrote: > > > > Hi! > > > > On Thu, 27 Aug 2009, praveen khethavath wrote: > > > >> > >> Hi, > >> > >> This is Praveen and i am doing PhD in Oklahoma state university. > >> I was not able to install the FT2232C driver on XUBUNTOS machine. > >> I am not able tp program Micaz using MIB520. > >> > >> when i try to make micaz install i see following error. > >> The device is not recognized. > >> > >> make micaz install mib510,/dev/ttyS0 > > > > Try to do a dmesg after you plug the board. The messages should indicate > > which /dev/ttyUSBX (never /dev/ttySX) device it gets. The MIB520 will get > > two: the first one is used to reprogram the mote while the second is used > > to talk to the mote's serial port. > > > > All the best! > > Razvan ME > > > >> mkdir -p build/micaz > >> compiling BlinkAppC to a micaz binary > >> ncc -o build/micaz/main.exe -Os -fnesc-separator=__ -Wall -Wshadow > >> -Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb > >> -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 > >> -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"praveen\" > >> -DIDENT_HOSTNAME=\"praveen-laptop\" -DIDENT_USERHASH=0x0fa84db1L > >> -DIDENT_TIMESTAMP=0x4a971fa5L -DIDENT_UIDHASH=0xd90a9f1eL > >> -fnesc-dump=wiring > >> -fnesc-dump='interfaces(!abstract())' > >> -fnesc-dump='referenced(interfacedefs, > >> components)' -fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc > >> -lm > >> compiled BlinkAppC to build/micaz/main.exe > >> 2052 bytes in ROM > >> 51 bytes in RAM > >> avr-objcopy --output-target=srec build/micaz/main.exe > >> build/micaz/main.srec > >> avr-objcopy --output-target=ihex build/micaz/main.exe > >> build/micaz/main.ihex > >> writing TOS image > >> cp build/micaz/main.srec build/micaz/main.srec.out > >> installing micaz binary using mib510 > >> uisp -dprog=mib510 -dserial=/dev/ttyS0 --wr_fuse_h=0xd9 -dpart=ATmega128 > >> --wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out --verify > >> Programmer is not responding. > >> make: *** [program] Error 2 > >> > >> Can you suggest how can i use mib520 in XUBUNTOS > >> > >> Thanks. > >> > >> -- > >> View this message in context: > >> > http://www.nabble.com/Mib520-FT2232C-driver-installation-tp25182815p25182815.html > >> Sent from the TinyOS - Help mailing list archive at Nabble.com. > >> > >> _______________________________________________ > >> Tinyos-help mailing list > >> [email protected] > >> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > >> > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > > -- > View this message in context: > http://www.nabble.com/Mib520-FT2232C-driver-installation-tp25182815p25192500.html > Sent from the TinyOS - Help mailing list archive at Nabble.com. > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
