Hi, I had it, but tried again and.. nothing. Can I ask you if you installed Karmic or upgraded from 9.04? I m thinking in format and install again 9.04 or use a virtual machine.. :S
Thanks, David 2009/11/3 Razvan Musaloiu-E. <[email protected]> > Hi! > > On Tue, 3 Nov 2009, David Sanz wrote: > > Hello Razvan, >> >> Thanks for your quick answer :-) Unfortunately, I already had libc6-dev >> installed, and new nesc 1.3.0 package seems not to solve the problem: when >> compiling, I obtain the same results. >> >> I ve also tried adding some includes in my makefie, but nothing.. is there >> anyway to reset dependency manually? >> >> > My bad, I didn't notice that you are compiling for telosb. :P Did you > install the MSP430 toolchain? You should be able to get it by doing 'apt-get > install msp430-tinyos'. Give it a try and let me know if doesn't work. I > just installed a fresh Ubuntu 9.10 and it worked. :D > > > All the best! > Razvan ME > > 2009/11/3 Razvan Musaloiu-E. <[email protected]> >> >> Hi! >>> >>> >>> On Tue, 3 Nov 2009, David Sanz wrote: >>> >>> Dear all, >>> >>>> >>>> After work perfectly with tin...@ubuntu 9.04, I upgraded my OS to >>>> Ubuntu >>>> 9.10, and now I am not able even to compile the simplest code. The >>>> results >>>> when trying to compile are in this way: >>>> >>>> $ make telosb >>>> >>>> mkdir -p build/telosb >>>> compiling SenseToRadioAppC to a telosb binary >>>> ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow >>>> -Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board= >>>> -DDEFINED_TOS_AM_GROUP=0x22 -I/opt/tinyos-2.1.0/tos/lib/printf >>>> -DIDENT_APPNAME=\"SenseToRadioApp\" -DIDENT_USERNAME=\"sanz\" >>>> -DIDENT_HOSTNAME=\"dSanz\" -DIDENT_USERHASH=0x556e4852L >>>> -DIDENT_TIMESTAMP=0x4aef1c37L -DIDENT_UIDHASH=0xb47d6cd5L >>>> SenseToRadioAppC.nc -lm >>>> >>>> /usr/lib/ncc/deputy_nodeputy.h:4:20: error: stddef.h: No such file or >>>> directory >>>> /usr/lib/ncc/nesc_nx.h:14:26: error: sys/inttypes.h: No such file or >>>> directory >>>> /usr/lib/ncc/nesc_nx.h:235: syntax error before `__nesc_ntoh_uint8' >>>> /usr/lib/ncc/nesc_nx.h:240: syntax error before `__nesc_hton_uint8' >>>> /usr/lib/ncc/nesc_nx.h:242: warning: type defaults to `int' in >>>> declaration of `base' >>>> /usr/lib/ncc/nesc_nx.h:242: `value' undeclared here (not in a function) >>>> /usr/lib/ncc/nesc_nx.h:242: warning: data definition has no type or >>>> storage class >>>> /usr/lib/ncc/nesc_nx.h:243: syntax error before `return' >>>> /usr/lib/ncc/nesc_nx.h:246: syntax error before `__nesc_ntoh_leuint8' >>>> /usr/lib/ncc/nesc_nx.h:251: syntax error before `__nesc_hton_leuint8' >>>> /usr/lib/ncc/nesc_nx.h:253: warning: type defaults to `int' in >>>> declaration of `base' >>>> /usr/lib/ncc/nesc_nx.h:253: redefinition of `base' >>>> ... >>>> >>>> After looking for in the mailing list and forum, I ve done >>>> tos-check-env, >>>> and everything seem to be OK, so I guess is a problem with paths or >>>> similar. >>>> I ve included stddef.h at /usr/lib/ncc >>>> I ve also included this lines >>>> >>>> CFLAGS+=-I/usr/lib/gcc/.../include // where there was stddef.h >>>> CFLAGS+=-I/usr/include/ >>>> >>>> in /opt/tinyos-2.x/support/make/sim.extra >>>> >>>> and does not work. Don't know what else to do. >>>> >>>> Do someone has had a similar problem? Does someone have any idea? >>>> >>>> >>>> Try to to install the libc6-dev package (apt-get install libc6-dev). >>> The >>> nesc 1.3.0 package is missing this dependency. The 1.3.1 from here is >>> fixed: >>> >>> http://cs.jhu.edu/~razvanm/wsn/debian/nesc-1.3.1.deb<http://cs.jhu.edu/%7Erazvanm/wsn/debian/nesc-1.3.1.deb> >>> <http://cs.jhu.edu/%7Erazvanm/wsn/debian/nesc-1.3.1.deb> >>> >>> >>> All the best! >>> Razvan ME >>> >>> >>
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
