Dear John. Thanks a lot!!
Yes, after configuring the root node with ID=11 makes communicate the nodes with the root node. But I've got two questions. 1) Why is configured the root node as ID=11, if in the TestRPL.nc appears: ...... #ifndef RPL_ROOT_ADDR #define RPL_ROOT_ADDR 1 #endif ...... For this reason I thought have ID=1 the root node not 11. 2) Is not possible make pings to the nodes. Must work in combination with the Pprouter to do it? This shows my terminal now: destination gateway interface aaaa::8/128 fe80::22:ff:fe00:7 1 aaaa::7/128 fe80::22:ff:fe00:7 1 aaaa::4/128 fe80::22:ff:fe00:4 1 IPProtocols - deliver -- off: 0 UDP - IP.recv: len: 28 (28, 28) srcport: 5678 dstport: 5678 rx_cksum: 0x1f11 my_cksum: 0x1f11 >>>> RX 11 7 110 215 IPProtocols - deliver -- off: 0 UDP - IP.recv: len: 28 (28, 28) srcport: 5678 dstport: 5678 rx_cksum: 0x1e75 my_cksum: 0x1e75 >>>> RX 11 4 272 216 Frag pool size: 12 SendInfo pool size: 3 SendEntry pool size: 12 Forward queue length: 0 heap region start: 0x122e length: 1500 used: 0 IPProtocols - deliver -- off: 0 UDP - IP.recv: len: 28 (28, 28) srcport: 5678 dstport: 5678 rx_cksum: 0x1e6b my_cksum: 0x1e6b >>>> RX 11 8 274 217 IPProtocols - deliver -- off: 0 ICMP: type: 155 rx_cksum: 0xa25f my_cksum: 0xa25f RPL: receive DAO IPProtocols - deliver -- off: 0 UDP - IP.recv: len: 28 (28, 28) srcport: 5678 dstport: 5678 rx_cksum: 0x1f10 my_cksum: 0x1f10 >>>> RX 11 7 111 218 IPProtocols - deliver -- off: 0 UDP - IP.recv: len: 28 (28, 28) srcport: 5678 dstport: 5678 rx_cksum: 0x1e74 my_cksum: 0x1e74 >>>> RX 11 4 273 219 Frag pool size: 12 SendInfo pool size: 3 SendEntry pool size: 12 Forward queue length: 0 heap region start: 0x122e length: 1500 used: 0 RPL: DAO TIMER 10610 10000 RPL: DAO: no DODOG or rank IPProtocols - deliver -- off: 0 UDP - IP.recv: len: 28 (28, 28) srcport: 5678 dstport: 5678 rx_cksum: 0x1e6a my_cksum: 0x1e6a >>>> RX 11 8 275 220 IPProtocols - deliver -- off: 0 ICMP: type: 155 rx_cksum: 0xa265 my_cksum: 0xa265 RPL: receive DAO IPProtocols - deliver -- off: 0 ICMP: type: 155 rx_cksum: 0xa262 my_cksum: 0xa262 RPL: receive DAO Alex. On Tue, Feb 28, 2012 at 7:57 PM, JeongGil Ko <[email protected]> wrote: > Try installing node 11 which should act as the root node. All other nodes > will periodically send data to the root node. > > -John > > ------ > JeongGil Ko > Ph.D. Candidate > Department of Computer Science > Johns Hopkins University > http://www.cs.jhu.edu/~jgko > > On Feb 28, 2012, at 12:00 PM, Alex FP wrote: > > > Dear all. > > > > If someone has worked with the TestRPL application, please could tell me > what must I expect with this app? > > > > I've followed the steps in > > > > http://docs.tinyos.net/tinywiki/index.php/TinyRPL > > > > But inside "app/test/TestRPL/udd" there is not a README or something to > give me a idea about what do it. > > > > I've installed the app in several motes whit ID:1,2,3, etc. But only I > get data from the mote connected directly to the PC using Printf command: > > > > java net.tinyos.tools.PrintfClient -comm serial@/dev/ttyUSB0:telosb > > > > > > destination gateway interface > > > > RPL: DAO TIMER 10427 10000 > > RPL: DAO: no DODOG or rank > > IP Protocol send - nxt_hdr: 58 iov_len: 6 plen: 6 > > Forwarding -- send to LL address:ff02::1a > > IPNeighborDiscovery - send - next: ff02::1a - ll source: > fe80::22:ff:fe00:1 > > l2 source: 01 00 42 c9 00 00 42 c9 > > l2 dest: ff ff 9a d1 5a 37 00 00 > > > > fragment length: 24 offset: 46 > > fragment length: 0 offset: 46 > > Frag pool size: 11 > > SendInfo pool size: 2 > > SendEntry pool size: 11 > > Forward queue length: 1 > > heap region start: 0x122e length: 1500 used: 0 > > sendDone: was not delivered! (0 tries) > > sendDone: iface: 1 key: 0 > > IPProtocols - deliver -- off: 0 > > ICMP: type: 155 rx_cksum: 0x67f8 my_cksum: 0x67f8 > > IP Protocol send - nxt_hdr: 58 iov_len: 6 plen: 6 > > Forwarding -- send to LL address:ff02::1a > > IPNeighborDiscovery - send - next: ff02::1a - ll source: > fe80::22:ff:fe00:1 > > l2 source: 01 00 42 c9 00 00 42 c9 > > l2 dest: ff ff 9a d1 f6 37 e5 2d > > > > fragment length: 24 offset: 46 > > fragment length: 0 offset: 46 > > sendDone: was not delivered! (0 tries) > > sendDone: iface: 1 key: 0 > > Generate Packet at 1 > > IP Protocol send - nxt_hdr: 17 iov_len: 28 plen: 28 > > Frag pool size: 12 > > SendInfo pool size: 3 > > SendEntry pool size: 12 > > Forward queue length: 0 > > heap region start: 0x122e length: 1500 used: 0 > > IPProtocols - deliver -- off: 0 > > ICMP: type: 155 rx_cksum: 0x67f8 my_cksum: 0x67f8 > > IP Protocol send - nxt_hdr: 58 iov_len: 6 plen: 6 > > Forwarding -- send to LL address:ff02::1a > > IPNeighborDiscovery - send - next: ff02::1a - ll source: > fe80::22:ff:fe00:1 > > l2 source: 01 00 42 c9 00 00 42 c9 > > l2 dest: ff ff 9a d1 f6 37 e5 2d > > > > fragment length: 24 offset: 46 > > fragment length: 0 offset: 46 > > sendDone: was not delivered! (0 tries) > > sendDone: iface: 1 key: 0 > > Frag pool size: 12 > > SendInfo pool size: 3 > > SendEntry pool size: 12 > > Forward queue length: 0 > > heap region start: 0x122e length: 1500 used: 0 > > IPProtocols - deliver -- off: 0 > > ICMP: type: 155 rx_cksum: 0x67f8 my_cksum: 0x67f8 > > Generate Packet at 1 > > IP Protocol send - nxt_hdr: 17 iov_len: 28 plen: 28 > > > > > > Probably the mote with ID:1 should be installed with the pprouter app, > but I did it and I haven't got something from the other nodes. > > > > Thanks for any ideas. > > > > Alex > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
