Examples are self explanatory: make z1 blip install,2 bsl,/dev/ttyUSB1
Replace ttyUSB1 for whatever port the mote is assigned. --Antonio On Wed, Mar 20, 2013 at 11:58 AM, Antonio Linan <[email protected]> wrote: > Read the wiki, again but carefully, it shows the files you need to change > for the applications to compile, and the code examples already points out > how to set the node id on compilation (install,X where X is the desired ID). > > --Antonio > > > On Wed, Mar 20, 2013 at 11:54 AM, Jhon James <[email protected]> wrote: > >> Hello Help Desk, Antonio and Eric, >> >> I was trying to install 6LowPAN Blip implementation on Z1 motes using >> the following link >> >> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0 >> >> >> I have the latest release of the TinyOs and the problem that I am >> currently having is that when I try to install the Ppp_Router example >> I get the following error >> >> make z1 blip install,1 >> >> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc: In >> function ‘LcpAutomatonP__0__processEventActions_’: >> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc:543:93: >> warning: variable ‘in_actions’ set but not used >> [-Wunused-but-set-variable] >> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: >> build/z1/main.exe section `.bss' will not fit in region `ram' >> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: region >> `ram' overflowed by 1534 bytes >> collect2: ld returned 1 exit status >> make: *** [exe0] Error 1 >> >> >> Now I believe that the latest tinyos-release does not contain the >> compressed implementation of the blip for z1 motes. Is that right??? >> >> >> Also how we know from here that the node id is 1?? I mean I did not >> burn the node id. The motes are new motes that I recieved almost a >> month ago. I only burnt the LED blink code just to blink the LED's and >> they work perfectly okay. >> >> >> >> Also I want to ask that when I do >> >> make z1 install >> >> it installs the firmware in ttyUSB0 device and i believe that MOTECOM >> variable tell which one to program. Now I have a 3 nodes one is >> ttyUSB0, other is ttyUSB1 and the third is ttyUSB2. What argument to >> pass in order to access the particular node?? >> >> >> Regard's >> > > > > -- > -- > Antonio Liñan Colina > R+D+I Engineer > @: [email protected] > @: [email protected] > ------------------------------ > Advancare > T: +34 93 582 02 70 > http://www.advancare.com > http://www.zolertia.com > http://zolertia.sourceforge.net > http://webshop.zolertia.com > -- -- Antonio Liñan Colina R+D+I Engineer @: [email protected] @: [email protected] ------------------------------ Advancare T: +34 93 582 02 70 http://www.advancare.com http://www.zolertia.com http://zolertia.sourceforge.net http://webshop.zolertia.com
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
