I can switch to that as well if that is more efficient not a problem. Thanks for helping out I will try and will get back to you if it works well. Thanks once again
On Wed, Mar 20, 2013 at 2:10 PM, Antonio Linan <[email protected]> wrote: > BTW, I'm using msp430-47, code size is a little smaller than msp430-46 but > nevertheless it compiles for both. > > --Antonio > > > On Wed, Mar 20, 2013 at 3:08 PM, Antonio Linan <[email protected]>wrote: > >> Makefile: >> COMPONENT=PppRouterC >> # PFLAGS += -DENABLE_SPI0_DMA >> # PFLAGS += -DCC2420_DEF_CHANNEL=21 >> >> CFLAGS += -DMAX_PARENT=1 >> CFLAGS += -DROUTE_TABLE_SZ=3 >> >> Results: >> >> warning: variable ‘in_actions’ set but not used >> [-Wunused-but-set-variable] >> compiled PppRouterC to build/z1/main.exe >> 37350 bytes in ROM >> 8134 bytes in RAM >> msp430-objcopy --output-target=ihex build/z1/main.exe build/z1/main.ihex >> writing TOS image >> a-linan@zolertia:~/Desktop/TinyOS/tinyos-github/apps/PppRouter$ >> >> --Antonio >> >> >> On Wed, Mar 20, 2013 at 2:57 PM, Jhon James <[email protected]> wrote: >> >>> defined them in makefile and commented the lines as instructed here is >>> the error >>> >>> >>> >>> >>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: >>> build/z1/main.exe section `.bss' will not fit in region `ram' >>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: region >>> `ram' overflowed by 1218 bytes >>> >>> collect2: ld returned 1 exit status >>> make: *** [exe0] Error 1 >>> >>> Regard's >>> >>> >>> On Wed, Mar 20, 2013 at 1:29 PM, Antonio Linan <[email protected]>wrote: >>> >>>> Add those defines to the Makefile, if you want to know where are >>>> defined by default use something like grep/find. >>>> >>>> --Antonio >>>> >>>> >>>> On Wed, Mar 20, 2013 at 2:23 PM, Jhon James <[email protected]>wrote: >>>> >>>>> Hello Antonio, >>>>> >>>>> >>>>> // UDP shell on port 2000// components UDPShellC; >>>>> // prints the routing table// components RouteCmdC; >>>>> >>>>> >>>>> >>>>> It is not mentioned in which file you need to comment these files. >>>>> PppRouterC.nc is the file in which I found these links to comment >>>>> >>>>> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0 >>>>> >>>>> You can update that link. Also I want to ask that those defines >>>>> >>>>> #define MAX_PARENT 1 >>>>> #define ROUTE_TABLE_SZ 3 >>>>> >>>>> where we have to define them?? I mean in the same PppRouter.nc file? >>>>> Moreover >>>>> >>>>> his is test code not committed to trunk (not will ever be), when we >>>>> manage to get a final solution that makes us feel comfortable and gets >>>>> accepted by the core we will bring these changes to main trunk, at the >>>>> moment all the testing can be found r*eferenced here*, and soon at My >>>>> GitHub in a test branch >>>>> >>>>> by 'referenced here' you mean this page ( >>>>> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0) or some >>>>> other?? >>>>> >>>>> >>>>> >>>>> On Wed, Mar 20, 2013 at 11:15 AM, Jhon James <[email protected]> >>>>> wrote: >>>>> > Hello Antonio, >>>>> > >>>>> > Thanks for the pointer. I just scrolled the page down. and read >>>>> > further. I thought that page was quite an old one. That is why I >>>>> asked >>>>> > whether that implementation is included in the latest release or not. >>>>> > I will change the code and will get back to you if I will need any >>>>> > further help. >>>>> > >>>>> > Thanks once again. >>>>> > >>>>> > Regard's >>>>> > >>>>> > On Wed, Mar 20, 2013 at 11:00 AM, Antonio Linan <[email protected]> >>>>> wrote: >>>>> >> Examples are self explanatory: >>>>> >> >>>>> >> make z1 blip install,2 bsl,/dev/ttyUSB1 >>>>> >> >>>>> >> >>>>> >> Replace ttyUSB1 for whatever port the mote is assigned. >>>>> >> >>>>> >> --Antonio >>>>> >> >>>>> >> >>>>> >> On Wed, Mar 20, 2013 at 11:58 AM, Antonio Linan < >>>>> [email protected]> wrote: >>>>> >>> >>>>> >>> Read the wiki, again but carefully, it shows the files you need to >>>>> change >>>>> >>> for the applications to compile, and the code examples already >>>>> points out >>>>> >>> how to set the node id on compilation (install,X where X is the >>>>> desired ID). >>>>> >>> >>>>> >>> --Antonio >>>>> >>> >>>>> >>> >>>>> >>> On Wed, Mar 20, 2013 at 11:54 AM, Jhon James <[email protected]> >>>>> wrote: >>>>> >>>> >>>>> >>>> Hello Help Desk, Antonio and Eric, >>>>> >>>> >>>>> >>>> I was trying to install 6LowPAN Blip implementation on Z1 motes >>>>> using >>>>> >>>> the following link >>>>> >>>> >>>>> >>>> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0 >>>>> >>>> >>>>> >>>> >>>>> >>>> I have the latest release of the TinyOs and the problem that I am >>>>> >>>> currently having is that when I try to install the Ppp_Router >>>>> example >>>>> >>>> I get the following error >>>>> >>>> >>>>> >>>> make z1 blip install,1 >>>>> >>>> >>>>> >>>> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc: In >>>>> >>>> function ‘LcpAutomatonP__0__processEventActions_’: >>>>> >>>> >>>>> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc:543:93: >>>>> >>>> warning: variable ‘in_actions’ set but not used >>>>> >>>> [-Wunused-but-set-variable] >>>>> >>>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: >>>>> >>>> build/z1/main.exe section `.bss' will not fit in region `ram' >>>>> >>>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: region >>>>> >>>> `ram' overflowed by 1534 bytes >>>>> >>>> collect2: ld returned 1 exit status >>>>> >>>> make: *** [exe0] Error 1 >>>>> >>>> >>>>> >>>> >>>>> >>>> Now I believe that the latest tinyos-release does not contain the >>>>> >>>> compressed implementation of the blip for z1 motes. Is that >>>>> right??? >>>>> >>>> >>>>> >>>> >>>>> >>>> Also how we know from here that the node id is 1?? I mean I did >>>>> not >>>>> >>>> burn the node id. The motes are new motes that I recieved almost a >>>>> >>>> month ago. I only burnt the LED blink code just to blink the >>>>> LED's and >>>>> >>>> they work perfectly okay. >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> Also I want to ask that when I do >>>>> >>>> >>>>> >>>> make z1 install >>>>> >>>> >>>>> >>>> it installs the firmware in ttyUSB0 device and i believe that >>>>> MOTECOM >>>>> >>>> variable tell which one to program. Now I have a 3 nodes one is >>>>> >>>> ttyUSB0, other is ttyUSB1 and the third is ttyUSB2. What argument >>>>> to >>>>> >>>> pass in order to access the particular node?? >>>>> >>>> >>>>> >>>> >>>>> >>>> Regard's >>>>> >>> >>>>> >>> >>>>> >>> >>>>> >>> >>>>> >>> -- >>>>> >>> -- >>>>> >>> Antonio Liñan Colina >>>>> >>> R+D+I Engineer >>>>> >>> @: [email protected] >>>>> >>> @: [email protected] >>>>> >>> ------------------------------ >>>>> >>> Advancare >>>>> >>> T: +34 93 582 02 70 >>>>> >>> http://www.advancare.com >>>>> >>> http://www.zolertia.com >>>>> >>> http://zolertia.sourceforge.net >>>>> >>> http://webshop.zolertia.com >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> -- >>>>> >> -- >>>>> >> Antonio Liñan Colina >>>>> >> R+D+I Engineer >>>>> >> @: [email protected] >>>>> >> @: [email protected] >>>>> >> ------------------------------ >>>>> >> Advancare >>>>> >> T: +34 93 582 02 70 >>>>> >> http://www.advancare.com >>>>> >> http://www.zolertia.com >>>>> >> http://zolertia.sourceforge.net >>>>> >> http://webshop.zolertia.com >>>>> >>>>> >>>> >>>> >>>> -- >>>> -- >>>> Antonio Liñan Colina >>>> R+D+I Engineer >>>> @: [email protected] >>>> @: [email protected] >>>> ------------------------------ >>>> Advancare >>>> T: +34 93 582 02 70 >>>> http://www.advancare.com >>>> http://www.zolertia.com >>>> http://zolertia.sourceforge.net >>>> http://webshop.zolertia.com >>>> >>> >>> >> >> >> -- >> -- >> Antonio Liñan Colina >> R+D+I Engineer >> @: [email protected] >> @: [email protected] >> ------------------------------ >> Advancare >> T: +34 93 582 02 70 >> http://www.advancare.com >> http://www.zolertia.com >> http://zolertia.sourceforge.net >> http://webshop.zolertia.com >> > > > > -- > -- > Antonio Liñan Colina > R+D+I Engineer > @: [email protected] > @: [email protected] > ------------------------------ > Advancare > T: +34 93 582 02 70 > http://www.advancare.com > http://www.zolertia.com > http://zolertia.sourceforge.net > http://webshop.zolertia.com >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
