Hello Antonio, Thanks for the pointer. I just scrolled the page down. and read further. I thought that page was quite an old one. That is why I asked whether that implementation is included in the latest release or not. I will change the code and will get back to you if I will need any further help.
Thanks once again. Regard's On Wed, Mar 20, 2013 at 11:00 AM, Antonio Linan <[email protected]> wrote: > Examples are self explanatory: > > make z1 blip install,2 bsl,/dev/ttyUSB1 > > > Replace ttyUSB1 for whatever port the mote is assigned. > > --Antonio > > > On Wed, Mar 20, 2013 at 11:58 AM, Antonio Linan <[email protected]> wrote: >> >> Read the wiki, again but carefully, it shows the files you need to change >> for the applications to compile, and the code examples already points out >> how to set the node id on compilation (install,X where X is the desired ID). >> >> --Antonio >> >> >> On Wed, Mar 20, 2013 at 11:54 AM, Jhon James <[email protected]> wrote: >>> >>> Hello Help Desk, Antonio and Eric, >>> >>> I was trying to install 6LowPAN Blip implementation on Z1 motes using >>> the following link >>> >>> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0 >>> >>> >>> I have the latest release of the TinyOs and the problem that I am >>> currently having is that when I try to install the Ppp_Router example >>> I get the following error >>> >>> make z1 blip install,1 >>> >>> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc: In >>> function ‘LcpAutomatonP__0__processEventActions_’: >>> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc:543:93: >>> warning: variable ‘in_actions’ set but not used >>> [-Wunused-but-set-variable] >>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: >>> build/z1/main.exe section `.bss' will not fit in region `ram' >>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: region >>> `ram' overflowed by 1534 bytes >>> collect2: ld returned 1 exit status >>> make: *** [exe0] Error 1 >>> >>> >>> Now I believe that the latest tinyos-release does not contain the >>> compressed implementation of the blip for z1 motes. Is that right??? >>> >>> >>> Also how we know from here that the node id is 1?? I mean I did not >>> burn the node id. The motes are new motes that I recieved almost a >>> month ago. I only burnt the LED blink code just to blink the LED's and >>> they work perfectly okay. >>> >>> >>> >>> Also I want to ask that when I do >>> >>> make z1 install >>> >>> it installs the firmware in ttyUSB0 device and i believe that MOTECOM >>> variable tell which one to program. Now I have a 3 nodes one is >>> ttyUSB0, other is ttyUSB1 and the third is ttyUSB2. What argument to >>> pass in order to access the particular node?? >>> >>> >>> Regard's >> >> >> >> >> -- >> -- >> Antonio Liñan Colina >> R+D+I Engineer >> @: [email protected] >> @: [email protected] >> ------------------------------ >> Advancare >> T: +34 93 582 02 70 >> http://www.advancare.com >> http://www.zolertia.com >> http://zolertia.sourceforge.net >> http://webshop.zolertia.com > > > > > -- > -- > Antonio Liñan Colina > R+D+I Engineer > @: [email protected] > @: [email protected] > ------------------------------ > Advancare > T: +34 93 582 02 70 > http://www.advancare.com > http://www.zolertia.com > http://zolertia.sourceforge.net > http://webshop.zolertia.com _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
