On Tue Aug 15 2000 at 14:32, [EMAIL PROTECTED] wrote:
> I recall that 3COM cards select the connector automatically (that should
> result in your case to the RJ-45, if that is plugged in) or according to a
> preset in the EEPROM of the card. That setting can be inspected/changed
> with a configuration utility on the 'EtherDisk' which comes with the card
> (probably available from the 3COM website). I think you need a minimal DOS
> environment to run that utility.
If I recall correctly, there is a utility about the place called
something like 3c5x9utils that does exactly the same (if not better)
job of (re)setting and inspecting those old legacy cards on a linux
box. It's only a small program, sources for it should be somewhere
like metalab.unc.edu and similar archive sites.
Cheers
Tony
