chill;608146 Wrote: > Thanks for the confirmation. So it must be the optional half duplex mod > that makes all the difference then....
erm...dunno. Half-duplex introduces collision detection - and lowers bandwidth. I'm not sure we can have a "logical" discussion about this. IF there is an effect, it is RFI/noise getting into the Touch via ethernet cable. Nothing to do with TCP/IP or any of the "logical" OSI layers per se. However, of course the noise profile is subject to change according to what is being sent electrically up/down the ethernet cable. I'm not convinced this has anything to do with operating systems. The first thing I would do is use CAT5 (unshielded) cable between server-router and router-Touch to avoid RF bridging. Ferrite clamps at both ends are also worth investigating. Or use wi-fi!!! -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=84742 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
