DaveKen;615581 Wrote: > Hi Phil, > Thanks for your continuing interest. > The only info that I have is that which the eBay Seller included on his > listing: - > > http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120683339960&ssPageName=STRK:MEWNX:IT > > if that doesn't find it it was eBay Item number: 120683339960 > > The listing title states 5v 1a and 5v 100ma, well below the 3a you > advise as being required. > FWIW I'm listening to Radio 2 (SOTS, my era) internet radio, this > morning with the joint 5v outputs from my other linear PSU (safe?) and > everything is behaving faultlessly. Later today I plan to insert the > CL-less RE into the circuit between PSU and Touch. > Cheers, > Dave.
Dave, the transformer on that PSU appears to be rated at 1.65VA? so at 5V it can deliver 330ma on each secondary... For the Touch you need AT LEAST a 5x1.5 or 7.5VA PSU - preferably larger. I have one running from a 2.5amp TDK-Lambda medical-grade supply - it gets VERY hot. You should check your transformer is not too warm... IMO you need a much bigger transformer and more heatsinking than is available on that PSU. regards Phil -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - Audiolense 3.3/2.0+INGUZ DRC - MF x-dacv3/x-10/x-psu(Audiocom full mods) - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Belden Digital,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=86001 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
