lake_eleven;662086 Wrote: > OK, I have now screwed up my Touch, a little impatience pulled the land > off left channel cap. Tried to drop a solder blob , still no sound from > left channel. > Joe, how did you fix this. I am not sure if the input or output side > has come off. I have marked it in the image below. Any help is much > appreciated!.
Easy to do huh??? Sheesh If you look towards the RCA connectors, you will see a gold test point MAYBE 1/4 away, from what I can tell from your pic anyway. Use your DVM to see if the "solder blob" you made and it are a short. IF YES, double check the right channel to verify it is the same. If yes again, then what I did was put some solder on that TINY gold test point and then run a solder tinned wire to it and solder it from there to your "solder blob" test again with your meter, cross fingers ( like I did) and hope for the best. Mine was on the opposite side of the cap and the right channel so I can't be 100% sure this will work for you, but I think it will. You just have to be sure the land you pulled off goes to that spot, which I think it does. Let me know and if you need help email me at [email protected] and I will try my best. You can even call me if you want too. Let me know how you make out.. -- bitstopjoe Joe Sica ------------------------------------------------------------------------ bitstopjoe's Profile: http://forums.slimdevices.com/member.php?userid=45024 View this thread: http://forums.slimdevices.com/showthread.php?t=83412 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
