diego wrote: > > > Playback: > Status: Running > Interface = 3 > Altset = 2 > URBs = 8 [ 8 8 8 8 8 8 8 8 ] > Packet Size = 156 > Momentary freq = 104004 Hz (0xd.0020) > Feedback Format = 16.16 > Interface 3 > Altset 1 > Format: S16_LE > Channels: 2 > Endpoint: 3 OUT (ASYNC) > Rates: 44100, 48000, 88200, 96000, 176400, 192000 > Data packet interval: 125 us > Max Packet Size = 104 > EP Attribute = 0x0 > Interface 3 > Altset 2 > Format: S24_3LE > Channels: 2 > Endpoint: 3 OUT (ASYNC) > Rates: 44100, 48000, 88200, 96000, 176400, 192000 > Data packet interval: 125 us > Max Packet Size = 156 > EP Attribute = 0x0 >
This all looks reasonable except for the "Momentary freq = 104004 Hz (0xd.0020)" line - this is not close to any of the desired sampling rates. Can you try at 44.1 and see if this line is slightly above/slightly below 44100 which is what async should do (repeat the cat command or look at the info screen on the player which uses this line to create the display). Then change to higher rate material and see what is says. It would be good to ask the firmware author what feedback messages they expect as 104KHz is not close to any rate. ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
