Triode wrote: > This all looks reasonable except for the "Momentary freq = 104004 Hz > (0xd.0020)" line - this is not close to any of the desired sampling > rates. Can you try at 44.1 and see if this line is slightly > above/slightly below 44100 which is what async should do (repeat the cat > command or look at the info screen on the player which uses this line to > create the display). Then change to higher rate material and see what > is says. It would be good to ask the firmware author what feedback > messages they expect as 104KHz is not close to any rate.
It shows EXACTLY 44100 - which is probably not what it should... right? However, with 96k - files it continues clicking all the time... So I tried switching a couple of time between 44.1k and 96k - files and got the result a couple of times. The result: 44.1 k -files show consistently as playing at 44100, exactly. while playing 96k files show sometimes 96002, sometimes 96004, sometimes 88002 (!) and sometimes 104004 Hz So it just does not get the frequency right... What to do? ------------------------------------------------------------------------ diego's Profile: http://forums.slimdevices.com/member.php?userid=40897 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
