rgro wrote: > In order to make EDO and tt 3.0 work together, you'll probably need to > either disable or change the Priority settings in the tt 3.0 files. If > you're familiar with using WinSCP and going into the Touch firmware, > this'll be relatively simple. If not, you'll have to decide whether or > not you want to learn. Some information can be found here: > > http://touchtoomuch.wordpress.com/2012/05/12/squeezebox-touch-optimisations-based-on-tt3-0-and-edo-mods/
I tried it, but I did not even get the chance to change the settings. With EDO installed, then installing TT3.0, the SBT does not boot anymore correctly. It boots a moment until the screen turns white for a short second and then turns black and does not react anymore. No possiblity to contact it through WinSCP either. Luckily, factory reset via the bottom on the back still worked and helped me out. So for the time being, I leave only EDO installed, even though I can't use USB output or 192k yet. ------------------------------------------------------------------------ diego's Profile: http://forums.slimdevices.com/member.php?userid=40897 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
