tubesguy wrote: > Yes, ground wire twisted with each signal wire until you get close to > the Buff, then all of the grounds together into the G input of the Buff. > If that isn't clear, you can check out the Hifiduino site for pics of > the grounding and wiring scheme. > http://hifiduino.wordpress.com/category/usb-audio/ > > Short leads, as short as possible. When it all works satisfactorily, > you can start screwing around with buffering and isolating, reclocking, > etc.
baardbaard: Click on the link I've given you. Scroll down to the "2013/04/16" blog entry, "Got the XMOS 384khz USB interface" and then scroll down to "Connecting the DAC" where you will see how the wiring is done. Yes, it is a different USB board, and yes, a different DAC, but that is how you should wire the Amanero to the Buffalo. I use Cat5 cable twisted pairs, and, as I said, separate the wires of each pair as close to the Buffalo board as possible, with the ground wire of each pair connecting to the ground input of the Buffalo. ------------------------------------------------------------------------ tubesguy's Profile: http://forums.slimdevices.com/member.php?userid=1703 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
