starcat wrote: > Hmm, I really don't like this silicone idea. I have one and even that I > am technically skilled, it is still not an ideal mounting solution for > this amount of money. What if you have to take the Touch down, say for > any maintenance, cable rework, etc? Just glueing it to the wall is not a > "mounting" solution, not even if the plate would have cost 5$. > > Besides, I would prefer it in a more rectangular shape. The hugely > rounded corners with enlarged corner radius of the Touch itself makes it > look really strange. Even using *the* same corner radius as on the Touch > would have been much more pleasant. > > Just my 2c.
Hi Starcat, thanks for the feedback - with regards to the mounting to the wall with glue or silicone etc - the original ones i made actually had a couple of screw holes in which although worked - was a little more fragile if mounting on plasterboard as the frame is small and trying once you cut the hole you had to sink the plasterboard fixing close to the edge of the hole. It is doable by screwing a couple of holes in the frame and I have one mounted this way but i didn't feel it was the best way for everyone. as for shape of it, i thought it was pretty good but this will always be down to personal preference, I can do any shape really on a custom basis but will cost more to get the design drawn up and cut. Although not a perfect mounting solution, i think its still better than what Logitech produced (but then didn't sell) thanks again for feedback. Stu 'Custom Squeezebox Touch Wall Mount's Available' (http://forums.slimdevices.com/showthread.php?95114-Squeezebox-Touch-Wall-Mount-project-and-possibly-for-sale) ------------------------------------------------------------------------ trouty00's Profile: http://forums.slimdevices.com/member.php?userid=30875 View this thread: http://forums.slimdevices.com/showthread.php?t=95114 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
