I'm using an SBT in my car and have got the most important controls working off a modified MFSW (Multi Function Steering Wheel) and an IR mimic.This is a learning IR transmitter that I teach using the original SBT remote.It all works just fine (track up/down,volume up/down,play/pause and power),but the volume control is VERY slow and takes about 30 seconds to go from 0 to 100.Is there any way maybe using custom firmware that would let me change the increments or speed the volume control changes by when done by infra red remote,so instead of singley I can choose if it's 2X,3X,4X etc etc ?
Also it appears the wi-fi in the SBT is still switched on and active even when it's put into standby mode.This causes my car alarm to go off (it's the same if I leave my phone in the car with wi-fi switched on,turn it off and the alarm doesn't go off).I put it into standby during short stops so I don't have to wait for it to boot up again,so is there any way I can get it to switch the wi-fi off when it's in standby mode? I need wi-fi working when the SBT is in use as it's fitted (or soon will be) as a hideaway unit,so the setting up of playlists etc is done from my phone using Orange Squeeze. ------------------------------------------------------------------------ Imagewerx's Profile: http://forums.slimdevices.com/member.php?userid=62479 View this thread: http://forums.slimdevices.com/showthread.php?t=101736 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
