Man in a van wrote: > I'm working from memory here, so forgive me if I am wrong. > > 1. I think Triode recommended only a non-powered hub to be used e.g. > > http://www.misco.co.uk/productinfo/productinfo?productCode=Q439498 > > > Hub into Touch, Dac into hub. > > > 2. Settings>Advanced>Digital Output, shows a list, scroll down to Async > (I think) and enable, it should reboot. Then reselect your Digital > output. > > > 3. When you say you have two choices from the Digital Output, were they > 'Digital only' and 'Digital + analogue'? Normally the DAC name is > given. 'Digital only', will give the EDO benefits to your Dac vie the > Toslink and/or Co-ax outputs from the Touch (e.g. hi-res file > playback). > > > 4. If I remember correctly, (if your Dac is recognised by the Touch) > when you power down the Touch, disconnect the Dac, pull the plug on the > Touch, wait a short while and then plug in only the Touch. > > You should get a message on the screen saying 'Dac not connected', then > plug in your Dac. If you don't get the message then the Touch will > default to the two options mentioned previously. > > > I would try #2 first and then #4 and the others afterwards. > > Hope this helps, it is all about the USB chip in the Dac. > > atb > > Ronnie.
Thanks Ronnie. I will get back into this when I get back from the holiday here in the States. Next week. Regards, Gregg ------------------------------------------------------------------------ glrtrgi's Profile: http://forums.slimdevices.com/member.php?userid=63072 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
