Let me explain something.... you have no advantage using 100 octane fuel on your scooter. You should use 100 octane fuel on your highoutput car/Motorcycle (if the compression is that high that you need that stuff)
You should always use the things for the reason they have been made designed for. Always use something like Cat5 for your home equipment. Cause most of all is "cheap" stuff made for home small office. In a Server Environment there is a complete other situation - eg. all Hardware is powered by internal powersupplies / Converter and everything is grounded not only cause the Rack is grounded even all power cords uses 3 separate cables to deliver alternating current to the Device. In this scenario you should always use shielded versions of the cable. In a Home Environment - where most of your equipment is powered by external power converters that only delivers direct current to the devices and no earth - you should use unshielded Versions of the Cable. It does not matter if your using higher specs than needed but it does matter not to use lower specs than needed or faulty cables (then they didnt match any specs). Take a carefully look: [image: http://www.gepanet.com/strukturierte-verkabelung.png] All pairs have different twists and these twist are made for a reason - no pulse overlapping between the transmit and recieve lines. Gruss Jan ------------------------------------------------------------------------ DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=104828 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
