sgmlaw wrote: > Ok. Now try rebooting the host machine and after LMS is started and > running, try rebooting the client to see if the Touch can reach LMS > after it runs its startup routine. Just to confirm it is not a software > firewall glitch, temporarily disable your local windows firewall if you > already have a hardware firewall enabled at your router. Make sure the > IP address assigned to the host machine has not changed after the > reboot. You can readily see LMS broadcast IP address under the > information tab in the web settings page. It should be exactly the same > as the address shown in windows networking and the same listed under > your routers assignment table. > > If rebooting the client reestablishes a connection, then it is more > likely an OS setting conflict vs. one with LMS. Again, you can always > force a static IP address in windows networking if there are any doubts > or inconsistencies. Make sure it is one outside the DHCP assignment > range if you do. > > Either way, post the LMS server log so the program experts here can > pinpoint any errors specifically. Disabling all unused or unnecessary > plug ins on LMS, especially older third party ones that have not been > well-maintained, is always a good diagnostic practice. > > I am no expert on LMSs underlying code. And there is no indication yet > that LMS is the problem here. But if you determine the issue is with > LMS, sometimes a clean reinstall is faster and easier than hunting down > and correcting an application config error. Simply reinstalling LMS off > the installer (which is what you are likely doing) does not necessarily > overwrite all prior settings. If you conclude LMS the problem, then > consider a clean install. The steps for a complete uninstallation are > in the Wiki. Be sure that you save your playlists and favorites if you > do. Do a basic installation, and then enable only the additional plug > ins that you are actually using or require. > > Again, I dont think LMS is yet identified as your problem. But if you > decide to reinstall again, make sure it is a clean install.
Rebooting the server while LMS is playing through the Touch does the same thing. LSM cannot see the Touch. Attached is the Server Log File26205 The Windows Firewall settings do not change either. +-------------------------------------------------------------------+ |Filename: server.log.zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=26205| +-------------------------------------------------------------------+ ------------------------------------------------------------------------ tdehan's Profile: http://forums.slimdevices.com/member.php?userid=65180 View this thread: http://forums.slimdevices.com/showthread.php?t=109856
_______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
