Ikabob wrote: > Any suggestions??? >From the photos at the link I provided above, it appears that the front panel of the Touch detaches in one piece from the surrounding enclosure. Take care doing this as the front display is connected to the circuit board within the enclosure by two ribbon cables.
The rulers used for scale in the photos show that there is alignment between two plastic stubs on the back of the front panel and two openings near where the screws were removed to take off the metal base. Can you push something through these openings and force the front panel away from the surrounding enclosure? You may need to insert the edge of a credit card into any gap you create in order to keep this gap open. Use a second credit card to move outward from the gap you created. As you move, the front panel should release. Take care not to insert the credit cards too far into the Touch or you run the risk of disloging a component part or ribbon cable. [image: https://i.imgur.com/y5p8Fsq.jpg] Here is an example available on Amazon of the kind of tool set that can be used to do this job: https://www.amazon.com/iFixit-Prying-Opening-Tool-Assortment/dp/B0762BVXDY/ ------------------------------------------------------------------------ Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738 View this thread: http://forums.slimdevices.com/showthread.php?t=115580 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
