That T2 board might still has the "deaf syndrome" due to wrong R and C during mfg ?
Paulus N5SNN Sent from my iPhone On Jul 11, 2009, at 9:09 AM, "w6cjq" <[email protected]> wrote: So I had a chance to compare things I connected a sound card interface to a FT8800 a VX 150HT to a MFJ TNC and the T2 301 The T2 decoded the fewest amount about 50 % less than the sound card and about 40 % less than the MFJ TNC set up. I live in an area where the signal comes off the top of a 3600 ASL hill and gives you a full scale reading on the radios so I have lots of signal to play with, just have a hard time believing the T2 reciever is really not working that well, must be a setting in this thing somewhere. --- In [email protected], "Lynn W. Deffenbaugh (Mr)" <ldeff...@...> wrote: In my experience, it is unfair to compare a hardware TNC with a sound card interface. The sound card seems to be able to decode a much broader range of signals than the hardware TNCs. This is based on KPC-3+, TinyTrak4, and T2-135 hardware TNCs. Once the radio levels are tuned well, the TT4 and T2-135 (v1.2 only) can come close to what I was getting from AGWPEpro, but the sound card still consistently decoded 10-25% more packets even when fed by the same radio via an audio Y cable. That being said, I've still retired the sound card system and am using a TinyTrak 4 as my IGate (KJ4ERJ-2/-7) and T2-135s with Nuvi 350s as my trackers (KJ4ERJ-9 and KJ4ERJ-14). I just couldn't justify the overhead of keeping a windows PC alive and WIRED to a radio connected to an antenna on a tower in the lightning capital of the world (Florida). With the TT4, I'm using a Bluetooth to serial connection between the TNC and the javAPRSsrvr server so there's an ultimate air-gap protection there. Your mileage may vary, but the DSP power of a computer with sound card was always better in my experience. Lynn (D) - KJ4ERJ w6cjq wrote: Hi so I am a proud new owner of a T2-301 Prior to this I was using a west mountian sound card interface with a FT8800. So here is what I have noticed. I set the T2-301 up and got it talking through the com port on my computer. I use Ui View 32 and noticed that I was not seeing a lot of traffic. I turned on my HT and heard a lot of traffic on 144.39 but the T2-301 only seems to pass about every 5th or so transmission to UI-View 32. The stations do show up on the map and I can transmit a query through the T2-301 it just seems to be real selective about what it here and sends to the com port. I also monitored the unit in hyper terminal and the same amount of traffic appeared Any thoughts on this?? ------------------------------------ Yahoo! Groups Links
